Aluminium column SAL-3/B60 diameter Ø114mm at the base plate Anodising: 10 colours, each with possibility of chemical brightening Finish: grinded, anodised aluminium, option of elastomer protection in the colour of the column up to the height of 350 mm (other height on customer’s request) Luminaire mounting: directly on the column, luminaires with mounting ø60 mm with weight and surface parameters not exceeding the data from the strength table included in the technical data sheet Extension arm type: According to resistance calculations Packing: sleeve material Levels of energy absorption according to EN 12767:2019: 50-NE-B-S-SE-MD-0, 70-NE-B-S-SE-MD-0, 100-NE-B-S-SE-MD-0 Wall thickness Approximate unit volume Concrete footing / reinforcement basket type Concrete footing / reinforcement basket code 311150 / 311205 Acceptable windage of single luminaire [m2] for Cx=1 permissible weight of a single luminaire I zone, II Field category I & III zone, II Field category up to 450m by s.l II zone, II Field category III zone, II Field category up to 755m by s.l * Cradle to Cradle Certi ed® at Silver level applies only to products without the optional elastomer protection. Cradle to Cradle Certi ed® is a registered trademark of the Cradle to Cradle Products Innovation Institute. Zakład Produkcji Sprzętu Oświetleniowego „ROSA” Sp. z o.o. 1 Strefowa str., 43-109 Tychy, Poland, tel. 32 73 88 901 w