Ronafix Pre-packed Tanking Render
4Pages

{{requestButtons}}

Catalog excerpts

Ronafix Pre-packed Tanking Render - 1

Ronafix Pre-packed Tanking Render Pre-packed mortar for waterproof / tanking renders FEATURES waterproof frostproof high compressive strength high tensile strength high flexural strength pre-packed for increased confidence can be laid from 6mm Ronafix Pre-packed Tanking Render is a pre-bagged cement render supplied complete with dry powders and a bottle of polymer gauging liquid. Ronafix Pre packed Tanking Render will provide a watertight and tanking render. It is bonded with Ronacrete Standard Primer. Flexural Strength 7 days 28 days Min / max thickness Pack Size Coverage per pack Tensile Strength 7 days 28 days Physical Properties Compressive Strength 1 day 3 days 7 days 28 days Yield per pack Pack required per m³ Continued on following page... Other Ranges—Resin Bound and Bonded Surfacing, Concrete Repair and Coatings, Screeds, and, Flooring and Bedding

Open the catalog to page 1
Ronafix Pre-packed Tanking Render - 2

Ronafix Pre-packed Tanking Render Pre-packed mortar for waterproof / tanking renders Instructions for Use Preparation The substrate on which the Ronafix Pre-packed Tanking Render is being placed must be structurally sound, stable and suitable to receive and support a strong render. Surfaces should ideally be prepared by water/grit blasting or similar means to expose the aggregate and provide a mechanical key. All grease, oil, dirt and deleterious material must be removed by vacuuming. Damping The prepared surface must be thoroughly dampened with clean water. All surplus and standing water...

Open the catalog to page 2
Ronafix Pre-packed Tanking Render - 3

Ronafix Pre-packed Tanking Render Pre-packed mortar for waterproof / tanking renders Shelf Life and Storage Curing As soon as possible after finishing the surface cure the surface with Ronacrete Curing Membrane. Alternatively use tight fitting polythene to prevent rapid moisture loss and surface cracking and crazing. Ronafix Pre-packed Tanking Render should be stored unopened between 5°C and 25°C in dry warehouse conditions and out of direct sunlight. In these conditions shelf life is approximately 6 months. Refer to Safety Data Sheet. Site Attendance When on site Ronacrete representatives...

Open the catalog to page 3
Ronafix Pre-packed Tanking Render - 4

Ronafix Pre-packed Tanking Render Pre-packed mortar for waterproof / tanking renders Ronacrete Ltd, Flex Meadow, Harlow Essex, CM19 5TD, UK 13 BS EN 988-1 Rendering and Plastering Mortar Product: Ronafix Pre-packed Tanking Render Reaction to Fire: A2-s1,d0 Capillary Water Absorption: W1 < 0.40kg/m2 min0.5 Adhesive Strength: > 0.2 N/mm2 Dangerous Substances: Refer to Safety Data Sheet The information detailed in this leaflet is liable to modification from time to time in the light of experience and of normal product application, and before using, customers are advised to check with Ronacrete...

Open the catalog to page 4

All Ronacrete Limited catalogs and technical brochures

  1. RonaBond MCI

    3 Pages