1. Catalogs
  2. Ronacrete Limited
  3. Ronafix Pre-packed Render / Screed

Ronafix Pre-packed Render / Screed

Ronafix Pre-packed Render / Screed

Ronafix Pre-packed Render / Screed

Product catalog summary
Product Overview
Ronafix Pre-packed Render/Screed is a pre-packed mortar designed for weatherproof renders and screeds. It includes dry powders and a polymer gauging liquid, ensuring high compressive, tensile, and flexural strength. The product is waterproof, frostproof, and can be applied in thicknesses ranging from 6mm to 50mm.

Specifications
  • Compressive Strength: 38N/mm² (1 day), 70N/mm² (28 days)
  • Tensile Strength: 5.0N/mm² (7 days), 7.1N/mm² (28 days)
  • Flexural Strength: 12.9N/mm² (7 days), 16.2N/mm² (28 days)
  • Pack Size: 25kg, Coverage: 1m² @ 11mm, Yield: 11 litres


Application Procedure
  • Preparation: Ensure the substrate is sound and clean. Use water/grit blasting for surface preparation.
  • Damping: Thoroughly dampen the surface with clean water before priming.
  • Priming: Apply Ronacrete Standard Primer to the damp surface before applying the render/screed.
  • Mixing: Use a forced action mixer to combine dry components with the gauging liquid.
  • Placing: Apply the mixed material to the wet primer using plastering techniques.
  • Curing: Use Ronacrete Curing Membrane or polythene to prevent moisture loss.


Storage and Safety
Store unopened between 5°C and 25°C in dry conditions. The shelf life is approximately 6 months. Use protective clothing to prevent skin contact, inhalation, or ingestion. In case of contact, wash with soap and water and seek medical advice if necessary.

Technical Standards
Complies with BS EN 998-1 standards for rendering and plastering mortars. Reaction to fire is A2-s1,d0, with capillary water absorption < 0.40kg/m² . min0.5, and compressive strength > C50.

Disclaimer
Ronacrete Ltd provides this information as a guideline and is not responsible for the product's performance if used without verifying its suitability for the intended use.
See more

Catalog excerpts

Ronafix Pre-packed Render / Screed-1

Ronafix Pre-packed Render / Screed Pre-packed mortar for weatherproof renders and screeds FEATURES • waterproof • frostproof • high compressive strength • high tensile strength • high flexural strength • pre-packed for increased confidence • can be laid from 6mm • trafficable after 24 hours Ronafix Pre-packed Render / Screed is a pre-packed mortar supplied complete with dry powders and a bottle of polymer gauging liquid. Ronafix Pre-packed Render / Screed will provide a weatherproof mortar. Both are bonded with Ronacrete Standard Primer. Physical Properties Compressive Strength 1 day 3 days 7 days 28 days Tensile Strength 7 days 28 days Flexural Strength 7 days 28 days Min / max thickness (render) Mix / max thickness (screed) Pack Size Coverage per pack Yield per pack Pack required per m³ Continued on following page... Other Ranges—Resin Bound and Bonded Surfacing, Concrete Repair and Coatings, Screeds, and, Flooring and Bedding

 Open the catalog to page 1
Ronafix Pre-packed Render / Screed-2

Ronafix Pre-packed Render / Screed Pre-packed mortar for weatherproof renders and screeds Instructions for Use Preparation The substrate on which the Ronafix Pre-packed Render / Screed is being placed must be structurally sound, stable and suitable to receive and support a strong render / screed. Surfaces should ideally be prepared by water/grit blasting or similar means to expose aggregate and provide a mechanical key. All grease, oil, dirt and deleterious material must be removed. Damping The prepared surface must be thoroughly dampened with clean water. All surplus and standing water must...

 Open the catalog to page 2
Ronafix Pre-packed Render / Screed-3

Ronafix Pre-packed Render / Screed Pre-packed mortar for weatherproof renders and screeds Shelf Life and Storage Ronafix Pre-packed Render / Screed should be stored unopened between 5°C and 25° in dry warehouse conditions and out of direct sunlight. In these C conditions shelf life is approximately 6 months. Contains cement. The use of protective clothing, goggles, face mask, overalls, barrier cream and gloves is recommended to prevent any effect from prolonged skin contact, inhalation or ingestion. In the event of skin contact, wash with soap and water. Seek medical advice if irritation or pain...

 Open the catalog to page 3
Ronafix Pre-packed Render / Screed-4

Ronafix Pre-packed Render / Screed Pre-packed mortar for weatherproof renders and screeds Ronacrete Ltd, Flex Meadow, Harlow Essex, CM19 5TD, UK 13 BS EN 998-1 Rendering and Plastering Mortars Product: Ronafix Pre-packed Render / Screed Reaction to Fire: A2-s1,d0 Capillary Water Absorption: < 0.40kg/m² . min0.5 Compressive Strength: > C50 Flexural Strength: > F7 Adhesive Strength: ≥0.2N/mm² Wear Resistance BCA method: AR1 Release of Dangerous Substances: Refer to Safety Data Sheet The information detailed in this leaflet is liable to modification from time to time in the light of experience and...

 Open the catalog to page 4
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.