1. Catalogs
  2. Ronacrete Limited
  3. RonaBond Masonry Coating WB

RonaBond Masonry Coating WB

RonaBond Masonry Coating WB

RonaBond Masonry Coating WB

Product catalog summary
Product Overview
RonaBond Masonry Coating WB is a water-based, matt finish paint designed for both internal and external decoration and protective maintenance. It is suitable for application on concrete and render surfaces, offering high opacity, quick drying, and ease of use. The paint is non-flammable, low in odor, and available in over 150 pastel shades.

Specifications
  • Description: Semi-viscous paint
  • Dry Film Appearance: Protective matt
  • Viscosity: 120± 3KU
  • Total Solids: 61± 2% by weight, 40± 2% by volume
  • Density: 1.56± 0.05
  • Coverage: 8m² per litre
  • Number of Coats: 2
  • Application Method: Long pile roller, airless spray gun
  • Flashpoint: None
  • Drying Times: Surface dry in 30 minutes, recoatable in 2 hours


Application Instructions
1. Prepare the substrate to ensure a sound and stable surface. Apply RonaBond Fungicidal Treatment if necessary.
2. Apply metal or wood primers to dry surfaces and allow to dry for 12 hours.
3. Apply the first coat of RonaBond Masonry Coating WB, diluted with 5-10% water, at 8m² per litre and allow to dry.
4. Apply a second undiluted coat at 8m² per litre and allow to dry.
5. The coating is touch dry after 30 minutes and can be overcoated in 2 hours.
6. Coverage rates may vary based on substrate type, porosity, and texture.

Limitations and Recommendations
  • Not an elastomeric coating.
  • Apply at ambient temperatures between 5°C and 35°C.
  • Avoid application in strong direct sunlight or drying winds.


Cleaning and Maintenance
Application equipment should be washed with clean water immediately after use.

Packaging and Storage
RonaBond Masonry Coating WB is supplied in 16-litre tins. Store in frost-free conditions away from direct heat and sunlight. The shelf life of unopened tins is 12 months.

Health and Safety
The product is non-toxic and non-hazardous. Refer to health and safety data for more information.

Disclaimer
Information is subject to change, and users should verify they have the latest issue. Ronacrete Ltd is not responsible for product performance or any loss or damage arising from its use.
See more

Catalog excerpts

RonaBond Masonry Coating WB-1

RonaBond Masonry Coating WB Water based masonry paint for internal and external use FEATURES • decorative and protective paint • for use on most building surfaces • two coat application • suitable for internal and external application • available in more than 150 pastel shades • water based for safe application RonaBond Masonry Coating WB is a matt finish water based paint for internal and external decoration and protective maintenance. It can be applied to suitably prepared building surfaces including concrete and render. It has high opacity, is quick drying for same day recoating and is easy to use. It is water based with low odour and is non-flammable. RonaBond Masonry Coating WB is ideally suited to wall, beam and soffit application in car parks to provide protection to concrete and improve overall appearance, light balance and reflection. Density Coverage Number of coats Method Application Flashpoint semi viscous paint protective matt 120± 3KU by weight 61± 2% by volume 40± 2% 1.56± 0.05 8m² per litre 2 long pile roller, airless spray gun none Drying times surface dry recoatable Physical Properties Description Dry film appearance Viscosity Total solids RonaBond Masonry Coating WB is delivered to site ready to use. It is available in a wide range of pastel colours including base 0 colours prefixed ‘STD’ on the Zolpachrom colour swatch and base 0 colours prefixed ‘FAC’ on the Zolpachrom Concrete Repair and Coatings Continued on following page... Other Ranges—Resin Bound and Bonded Surfacing, Screeds, Flooring and Bedding, and Waterproofing and Tanking

 Open the catalog to page 1
RonaBond Masonry Coating WB-2

RonaBond Masonry Coating WB Water based masonry paint for internal and external use Colours (continued) colour card. These colours are produced and pigmented and despatched from stock by Ronacrete in the UK. Applied by a special roller, brush, conventional or airless spray RonaBond Masonry Coating WB is water based for safety in application. It can be applied to most suitably prepared (and primed if necessary) surfaces. RonaBond Masonry Coating WB is not an elastomeric coating apply at ambient temperatures between 5° and 35° C C avoid application in strong direct sunlight or strong drying winds...

 Open the catalog to page 2
RonaBond Masonry Coating WB-3

RonaBond Masonry Coating WB Water based masonry paint for internal and external use Shelf life and storage Store in frost free conditions away from direct heat and sunlight. Shelf life in unopened tins is 12 months Health and safety Non-toxic and non-hazardous; see health and safety data. The information detailed in this leaflet is liable to modification from time to time in the light of experience and of normal product application, and before using, customers are advised to check with Ronacrete Ltd, quoting the reference number, that they possess the latest issue. Any person or company using...

 Open the catalog to page 3
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.