RonaBond Crack Bridging Anti-Carbonation Coating WB High build, elastomeric & waterproof anti-carbonation coating FEATURES • high build anti-carbonation coating; excellent CO2 resistance • excellent self-cleaning properties • matt finish • elastomeric & waterproof façade coating • colours from Zolpachrom 2 & 3 ranges + suitable RAL colours • dynamic crack accommodation up to 2mm • water based • 10 year insurance backed warranty available RonaBond Crack Bridging Anti-Carbonation Coating WB is a façade coating formulated on a water based acryl-siloxane. It is used as a waterproof decorative coating and can be applied to most traditional building surfaces after suitable preparation. The addition of siloxane improves shedding of pollutants from the surface and resistance to migration residues from the substrate. RonaBond Crack Bridging Anti-Carbonation Coating WB is a high build elastomeric, waterproof and carbonation resistant coating. It protects facades against water ingress while allowing diffusion of normal levels of moisture vapour from the backgound. When applied to reinforced concrete it provides excellent protection against corrosion of reinforcement. RonaBond Crack Bridging Anti-Carbonation Coating WB System 2 For 0.2mm live crack accommodation 1 coat primer 1 coat RonaBond Crack Bridging Anti-Carbonation Coating WB @ 3.5m² per litre RonaBond Crack Bridging Anti-Carbonation Coating WB System 5 For 0.5mm live crack accommodation 1 coat primer 2 coats RonaBond Crack Bridging Anti-Carbonation Coating WB @ 5m² per litre RonaBond Crack Bridging Anti-Carbonation Coating WB System 10 For 1.0mm live crack accommodation 1 coat primer 1 coat RonaBond Crack Bridging Intermediate Coat @ 3.5m² per litre 1 coat RonaBond Crack Bridging Anti-Carbonation Coating WB @ 3.5m² per litre Concrete Repair and Coatings Continued on following page... Other Ranges—Resin Bound and Bonded Surfacing, Screeds, Flooring and Bedding, and Waterproofing and Tanking

RonaBond Crack Bridging Anti-Carbonation Coating WB High build, elastomeric & waterproof anti-carbonation coating Systems (continued) RonaBond Crack Bridging Anti-Carbonation Coating WB System 20 For 2.0mm live crack accommodation 1 coat primer 1 coat RonaBond Crack Bridging Intermediate Coat @ 3.5m² per litre with RonaBond Crack Bridging Fabric 1 coat RonaBond Crack Bridging Intermediate Coat @ 3.5m² per litre 1 coat RonaBond Crack Bridging Anti-Carbonation Coating WB @ 3.5m² per litre When using the RonaBond Crack Bridging Anti-Carbonation Coating WB 2 system, the primer should be either RonaBond...

RonaBond Crack Bridging Anti-Carbonation Coating WB High build, elastomeric & waterproof anti-carbonation coating Colours (continued) and BS colours can also be produced, consult Ronacrete technical department for further information. Do not apply below 5oC or above 35oC. Do not apply on soffitts or below DPC level or to structures containing high levels of moisture; in these locations use RonaBond Zolpacryl. RonaBond Crack Bridging Anti-Carbonation Coating WB can be applied on to previously painted surfaces provided paint is sound, well bonded and the correct primer has been chosen. Site trials...

RonaBond Crack Bridging Anti-Carbonation Coating WB High build, elastomeric & waterproof anti-carbonation coating Instructions for Use (continued) RonaBond Crack Bridging Anti-Carbonation Coating WB can be applied using airless spray. The nozzle size shall be 625-629. Included within the spray should be a 60 mesh filter. Dilution of the coating can be made with water between 210%. Site attendance When on site Ronacrete representatives are able, if asked, to give a general indication of the correct method of installing a Ronacrete product. It is important to bear in mind that Ronacrete Ltd is...