RonaBond Bedding Mortar
4Pages

RonaBond Bedding Mortar Certificate No. 90/2422 Pre-packed mortar for bedding brick slips and building components FEATURES • • • • • • pre-packed brick slip bedding mortar British Board of Agrément approved for bedding brick slips waterproof and frostproof excellent durability monolithic adhesion high strength and waterproof RonaBond Bedding Mortar is used to bond brick slips, copings and other components to concrete and building surfaces. The cured mortar has high physical strength, is waterproof and frost proof and will not break down through frost action. Ronacrete Standard Primer is used to provide monolithic adhesion between the mortar, the slip and the substrate. Careful surface preparation is essential to ensure adhesion, long term durability and performance. Performance Data Freeze / thaw cycle tests Temperature Range Flexural Strength Initial Flexural Strength After 120 Cycles Pull off tests—Calcium Silicate Brick Normal Cure 1.05N/mm² Immersed in CaC03 0.50N/mm² Freeze / Thaw (50 cycles) 0.71N/mm² Thermal Cycling 0.81N/mm² Pull off tests—Clay Bricks Normal Cure Immersed in CaC03 Freeze / Thaw (50 cycles) Thermal Cycling In no case did the brick / mortar or concrete / mortar bond fail. Continued on following page... Other Ranges—Resin Bound and Bonded Surfacing, Concrete Repair and Coatings, Screeds, and Waterproofing and Tanking

RonaBond Bedding Mortar Certificate No. 90/2422 Pre-packed mortar for bedding brick slips and building components Compressive Strength 1 day 3 days 7 days 28 days Tensile Strength 7 days 28 days Flexural Strength 7 days 28 days Physical Properties Pack Size Packs required per m³ Yield per pack Coverage per pack Min / max application depth One 25kg pack of RonaBond Bedding Mortar will fix 70 slips (65mm x 225mm) using a 10mm bed. One 2kg pack of Ronacrete Standard Primer is sufficient for 150 slips (concrete surface and slip). 1. The surface to receive the slip must be mechanically prepared...

RonaBond Bedding Mortar Certificate No. 90/2422 Pre-packed mortar for bedding brick slips and building components Instructions for Use (continued) Mixing RonaBond Bedding Mortar provides optimum performance when machine mixed in a forced action mixer (eg. Creteangle pan mixer). Do not use a free fall mixer. Mix the dry components and when evenly dispersed add the minimum amount of the supplied gauging liquid to provide sufficient workability for compaction and surface finish. Application Temperature RonaBond Bedding Mortar can be used in most weather conditions and in a wide temperature...

RonaBond Bedding Mortar Certificate No. 90/2422 Pre-packed mortar for bedding brick slips and building components Ronacrete Ltd, Flex Meadow, Harlow Essex, CM19 5TD, UK 13 0836-CPR-13/F044 Product: RonaBond Bedding Compressive Strength at 28 days at 20C: > 45N/ mm2 Content of Chlorides : < 0.1% Reaction to Fire: A2-s1,d0 Capillary Water Absorption: W1 < 0.40kg /m2 . min0.5 Dangerous Substances : Refer to Safety Data Sheet The information detailed in this leaflet is liable to modification from time to time in the light of experience and of normal product application, and before using,...