About us Climbing Wall Products ROPED CLIMBING WALLS Climbing walls designed to every requirement and equipped with a safety system for top rope climbing (double bolt lower offs) and lead climbing (clip in bolt hangars) Usually a minimum of 6.0m– 7.00m in height for effective use the walls can be designed to any requirement and with endless design potential A wide variety of materials can be employed from simulated rock to a dynamic multifaceted finish for indoor walls All walls are fitted with a matrix of fixing points and a variety of bolt on holds which means that climbing routes can be constantly changed Initial route setting is provided for every installation and an on going route setting service is available Auto belays can be fitted which allow a climber to use the wall without a partner holding the rope Rockworks can provide all ancillary climbing equipment required for roped walls including harnesses, helmets and belay devices In house operational training and management risk assessments can be provided by our Technical Advisor for any facility All roped climbing walls are engineered and tested to BS EN 12572 – 1:2007