RW SEMI-RIGID AND RIGID SLABS
7Pages

RW SEMI-RIGID AND RIGID SLABS (RWA45, RW3, RW4, RW5 & RW6)

RW SEMI-RIGID AND RIGID SLABS RW SEMI-RIGID AND RIGID SLABS RW SEMI-RIGID AND RIGID SLABS Versatile building slabs for a wide range of general building applications, ROCKWOOL RW semi-rigid and rigid slabs are high quality resin bonded slabs that can be used for thermal, acoustic and fire resistant insulation in general building applications. The slabs are available in a wide range of thicknesses and densities to suit most requirements. CE marked to EN 13162 and Euroclass A1 non-combustible. ROCKWOOL RW Slabs conform to: BS EN 13162:2012: Thermal insulation products for buildings. Factory...

RW SEMI-RIGID AND RIGID SLABS RW SEMI-RIGID AND RIGID SLABS Technical information Fire All Rockwool RW slab products, either un-faced or with an aluminium foil or glass fleece on one or both surfaces, achieve an A1 classification in accordance with BS EN 13501-1 and therefore comply with the requirements of non-combustible materials/products, as defined in all UK and Ireland Building Regulations. Dimensions & density Acoustic performance ROCKWOOL stone wool products work in two distinct ways to reduce noise, either by impeding the transmission of sound through an element of the structure or...

RW SEMI-RIGID AND RIGID SLABS RW SEMI-RIGID AND RIGID SLABS Acoustic Solutions for Internal metal stud partition walls Walls - steel frame party wall Lightweight 50mm metal partition - Rw 41dB Typical Twin light steel frame construction Two separate steel frame walls are constructed. Minimum 60mm RWA45 slabs are slotted into the cavity between the two steel frames and butt jointed. (Actual thickness of insulation will be determined by the as built cavity width between each frame). Fully fill the depth of the frame on both sides with 75mm RWA45 slabs, (or thickness to suit stud depth) with...

RW SEMI-RIGID AND RIGID SLABS RW SEMI-RIGID AND RIGID SLABS Lightweight 70mm metal partition - Rw 44dB Lightweight 70mm metal partition - Rw 55dB Studs: 70mm metal ‘C ‘studs at 600mm Centres Studs: 70mm metal ‘C ‘studs at 600mm Centres Facings: 1 layer of 12.5mm standard plasterboard (total mass per unit area 8.0kg/m² each side) Facings: 2 layers of 12.5mm acoustic plasterboard (total mass per unit area 20.0kg/m² each side) Insulation: 30mm ROCKWOOL RW3 slab Insulation: 50mm ROCKWOOL RWA45 slab Weighted sound reduction Weighted sound reduction Fire resistance Fire resistance Maximum height...

RW SEMI-RIGID AND RIGID SLABS ROCKWOOL stone wool is produced from diabase rock, which is naturally and continually replenished from within the earth at a higher rate than it is used. ROCKWOOL have invested to make sure recycling is a key part of our business. Waste material, refurbishment and demolition waste, along with off-cuts, can all be transformed into ROCKWOOL insulation briquettes and used in our furnaces. In fact, more than 75% of our stone wool waste is recycled. ROCKWOOL also runs a product recycling program from our recycling centre in Bridgend. ROCKWOOL Insulation is made from...

August 2018 ROCKWOOL Limited Pencoed Bridgend CF35 6NY Tel: 01656 862 621 info@rockwool.co.uk rockwool.co.uk