Catalogs >
ROCKWOOL >
ROCKLAP H&V PIPE SECTION PACKING GUIDE

ROCKLAP H&V PIPE SECTION PACKING GUIDE
8Pages

Add to favorites

Catalog excerpts

ROCKLAP H&V PIPE SECTION PACKING GUIDE - 1

ROCKLAP H&V PIPE SECTION PACKING GUIDE Pre-formed insulation with a foil facing and self-adhesive lap

Open the catalog to page 1

ROCKLAP H&V PIPE SECTION PACKING GUIDE - 2

ROCKLAP H&V PIPE SECTION PACKING GUIDE ROCKLAP H&V PIPE SECTION PACKING GUIDE RockLap H&V Pipe Sections are strong lengths of pre-formed insulation with a one piece, factory applied foil facing with an integral self-adhesive lap. This integral lap ensures fast and easy installation: just snap the sections onto the pipe, peel off the backing tape and smooth down for a completely sealed joint. The Pipe Sections are designed for thermal and acoustic insulation of heating, ventilation and air conditioning pipework in a temperature range of 0°C to 250°C.

Open the catalog to page 2

ROCKLAP H&V PIPE SECTION PACKING GUIDE - 3

Advantages • Resilient, high performance barrier provided by one-piece, reinforced foil with integral lap • Fast and simple installation reduces costs and time on site Installation may be carried out in winter conditions • Tape requirement reduced • Limited combustible product with surface finish also complying to Class 0 Sizes & packaging RockLap H&V Pipe Sections are supplied in 1 metre lengths and are available to suit a wide variety of pipe outer diameters (O.D.) from 17mm to 406mm. The sections are also available in an array of thicknesses to suit the level of insulation required (20mm...

Open the catalog to page 3

ROCKLAP H&V PIPE SECTION PACKING GUIDE - 4

ROCKLAP H&V PIPE SECTION PACKING GUIDE Specification For information on specifying the correct thickness of material, please refer to our brochure entitled: • The thickness of ROCKWOOL Insulation in accordance with BS5422:2009. For detailed specification clauses, please refer to our: • HVAC Specification Detail Guide. You can download both of these documents from www.rockwool.co.uk HVAC SPECIFICATION DETAIL GUIDE A guide to specifying ROCKWOOL insulations for HVAC applications THE THICKNESS OF ROCKWOOL INSULATION In accordance with BS5422:2009

Open the catalog to page 4

ROCKLAP H&V PIPE SECTION PACKING GUIDE - 5

ROCKLAP H&V PIPE SECTION PACKING GUIDE Applicable DOP Lambda Curve Size is available to order Size currently not available 42 Number indicates the Linear Metres per carton ■ These sections come "split" and are packed as single lengths which are shrink wrapped in polyethylene # These sections come "unsplit" and are packed as single lengths which are shrink wrapped in polyethylene In accordance with REACH health and environment regulations, there are no hazardous classifications associated with ROCKWOOL stone wool in respect to physical, health and environmental considerations. ROCKWOOL...

Open the catalog to page 5

ROCKLAP H&V PIPE SECTION PACKING GUIDE - 6

The ROCKWOOL Trademark ROCKWOOL® - our trademark The ROCKWOOL trademark was initially registered in Denmark as a logo mark back in 1936. In 1937, it was accompanied with a word mark registration; a registration which is now extended to more than 60 countries around the word. The ROCKWOOL trademark is one of the largest assets in the ROCKWOOL Group, and thus well protected and defended by us throughout the world. If you require permission to use the ROCKWOOL logo for your business, advertising or promotion. You must apply for a Trade Mark Usage Agreement. To apply, write to:...

Open the catalog to page 6