Rockfon® System B Adhesive™
9Pages

Part of the ROCKWOOL Group Rockfon® System B Adhesive™ System Description A bonded adhesive installation method for walls and ceilings G ood sound absorption despite the limited soffit height Adhesive bonded to horizontal, vertical and inclined surfaces Range of tile layout possibilities, including aligned or brick patterns, and islands F or quick installation of Blanka and Blanka Activity B edge products

Rockfon® System B Adhesive™ Description Rockfon System B Adhesive is an easy to install adhesively bonded Rockfon System B Adhesive consists of Rockfon B edge tiles, Rockfon solution which provides good sound absorption. Blanka and adhesives which are suitable for different applications and types of soffit. This versatile solution can be used on horizontal, Creating an acoustic (concealed) ceiling in areas with limited soffit vertical and sloping surfaces, as a complete continuous solution, in height (both new build and renovation), where the use of a traditional aligned or off-set...

Rockfon® System B Adhesive™ Recommended adhesives Table 1: Packaging Substrate type Substrate conditions Recommended adhesives Concrete, gypsum, wood, stone/brick (no metal) Even and uneven (< 4 mm/2m and < 2 mm/tile length or width) substrate Rockfon SwiftFix (waterborne dispersion adhesive) Application method Open time Conditions (application, storage, transport) * epending on the (un)evenness of the substrate, tile weight and substrate material/condition. D Should the soffit be very uneven and rough (irregularities >5mm) ensure to level out the surface. For more information, please...

Rockfon® System B Adhesive™ Tile installation Layout possibilities Rockfon System B Adhesive can be installed in aligned or off-set patterns (with or without gaps in between the tiles). Diagram 5: Aligned pattern. Offset pattern.

Rockfon® System B Adhesive™ Installation method The substrate should be dry, clean, dust free and level. Residues Apply the adhesive in the patterns shown in Diagrams 4 and in of paint or plaster must be removed as far as possible to ensure our recommended quantities. Press one side of the tile onto the Optimum adhesion to the substrate. If the substrate is very porous, substrate and the other side subsequently. The position of the tile use a suitable primer. The substrate needs to be able to carry the can be adjusted for a few minutes after the tile is put in place (see load and needs to...

Rockfon® System B Adhesive™ Minimum installation depth (mm) Diagram 7: The minimum installation depth is the thickness of the tile plus the thickness of the adhesive. Perimeter finish options Below are examples of perimeter finishing. Further details can be found on www.rockfon.co.uk. Diagram 8: Timber batten. Timber moulding. Timber moulding. Island - without perimeter.

Rockfon® System B Adhesive™ Performance System load bearing capacity Additional loads must not be placed on the tiles. All loads should be transferred to the soffit/substrate. Demountability Tiles mounted in Rockfon System B Adhesive are not demountable. Fire resistance Some Rockfon ceiling systems have been tested and classified in accordance with European norm EN 13501-2 and/or national norms. Please contact Rockfon. Compatible ceiling tiles and wall panels tiles All Rockfon B edge tiles listed below can be installed using the Rockfon System B Adhesive: Table 3: Tiles ® Rockfon Blanka...

Rockfon® System B Adhesive™ General installation recommendations Junction between ceiling and wall or other vertical surface Specially made timber trims or mouldings are ideally suited for use as It is recommended to use clean nitrile or PU coated gloves when the perimeter finish with this system. mounting Rockfon tiles in order to avoid finger prints and pollution of the surface. Timber trims, timber shadow battens and metal Shadow mouldings should not be used with fire resisting/protecting For an optimised work environment, we recommend installers always observe common work practices and...

linkedin.com/company/Rockfon-as pinterest.dk/Rockfon youtube.com/RockfonOfficial facebook.com/RockfonOffical instagram.com/Rockfon_Official 11.2020 | All colour codes mentioned are based on the NCS - Natural Colour System®© property of and used on license from NCS Colour AB, Stockholm 2012 or the RAL colour standard. Subject to alterations in range and product technology without prior notice. Rockfon accepts no responsibility for printing errors. Rockfon® is a registered trademark of the ROCKWOOL Group. Rockfon ROCKWOOL Limited T/A Rockfon 14th Floor, Chiswick Tower, 389 Chiswick High Road,...