5 . 3 . A N G L E C O N E

Product catalog summary

Angle Cone and Accessories Overview
The document provides detailed information about the Angle Cone and its accessories used in formwork construction. The Angle Cone allows for an infinitely variable anchoring angle adjustable between 45° and 90°, available in two diameters: D&W 15 mm and D&W 20 mm. It offers time and cost savings due to its simple assembly process.

Key Features and Benefits

Adjustable anchoring angle between 45° and 90°.
Available in two diameters: 15 mm (blue) and 20 mm (yellow).
Simple assembly reduces time and cost.
Easy removal of the cone base with a specialized tool.
Leaves a circular opening that can be closed with fine cone concrete for a homogeneous surface.

Technical Specifications

Angle-cone D&W 15 mm: Complete 2-part weight is 5.55 kg/100 units.
Angle-cone D&W 20 mm: Complete 2-part weight is 5.55 kg/100 units.
Removing-tool weight: 1.08 kg/unit for both 15 mm and 20 mm.
Fine grained concrete cone weight: 0.14 kg/unit.
2-component glue weight: 2 x 1.0 kg/unit.

Installation and Removal Process

Fix the basic cone to the wooden shuttering with nails.
Align using the 15°-raster marks.
Use a spacer tube or coupling nut for support.
After shuttering removal, use the removing-tool to extract the basic cone.
Close the circular cutout with a refined-concrete cone for a perfect surface.

Contact Information
ROBUSTA-GAUKEL GMBH & CO. KG
Headquarter: Brunnenstraße 36, D-71263 Weil der Stadt-Hausen
Phone: +49 7033 53710
Berlin Office: Rohdestraße 19, D-12099 Berlin (Tempelhof)
Phone: +49 30 75707000
Website: www.robusta-gaukel.com
Email: [email protected]

Catalog excerpts

ACCESSORIES FOR FORMWORK CONSTRUCTION 5 5.3. ANGLE CONE and accessories

Open the catalog to page 1

ANGLE CONE AND ACCESSORIES GENERAL INFORMATION Your benefits at a glance: G Infinitely variable anchoring angle can be adjusted between 45° and 90° 2 diameters available – D&W 15 mm (blue colour, in future rec colour), D&W 20 mm (yellow) Savings on time and money thanks to its simple assembly – no need for time-consuming solutions at a construction site The cone base can be easily removed with our removal tool A circular opening always remains once the cone base has been removed Opening can be easily closed off with fine cone concrete Homogeneous facing concrete surface Often during formwork...

Open the catalog to page 2

ANGLE CONE AND ACCESSORIES GENERAL INFORMATION The basic cone will be fixed to the wooden shuttering with 4 nails. Fitted marks at the circuit in a 15°-raster will ease the alignment around the longitudial spindle in an angle righteous way After removing the shuttering the removingtool will be put on to the basic cone. The oval-shaped peg grasps into the provided opening. After the removing there will remain a cirular cutout. With the spacer tube Ø 22 / 26 the headpiece will be put up in the requested angle. By swivelling through 90 ° the oval-shaped peg grips into the cone. Because of the all-around...

Open the catalog to page 3

ANGLE CONE AND ACCESSORIES GENERAL INFORMATION Parts angle-cone, complete, 2-part basic cone, recoverable headpiece, non-recoverable angle-cone, complete, 2-part basic cone, recoverable headpiece, non-recoverable Removing-tool Weight [kg/unit] Fine grained concrete cone fitting for all recoverable clamping-flanges Weight [kg/unit] 2-component-glue to glue in fine grained concrete cone Weight [kg/unit] Angle Cone and accessories

Open the catalog to page 4