3.2. CONCRETING BRACKET AND -PLATFORM for safe working at twin walls

CONCRETING BRACKET AND -PLATFORM FOR TWIN WALLS EXAMPLES FOR USE concreting bracket and working platform for twin walls

CONCRETING BRACKET AND -PLATFORM FOR TWIN WALLS GENERAL INFORMATION Your benefits at a glance: G Serves as temporary scaffolding to be able to stand safely without danger of falling when pouring concrete G Dangerously standing or walking on narrow concrete formwork or on ladders is unneeded, along with other improvisations G Can be fixed without concreting anchors in; no prior planning needed G Rapid mounting and dismantling due to handy individual parts G Plug-in railings can be inserted easily for fall heights above 2 m Concreting bracket and working platform for twin walls – for each site...

CONCRETING BRACKET AND -PLATFORM FOR TWIN WALLS ANCHORING TECHNOLOGY Most simple fixing for brackets and working platforms: The universal advantage: concreted anchoring parts are not necessary, the brackets can be hanged into any spot. This guaranties independence from planning and time and pressures during work cycle of construction. The bracket for twin walls can be attached to any spot with the hang in core into the gap of the element wall. A plastic tube will protect the core against concreting and contaminating, the pulling out of the core off the hardened concrete is possible without any...

CONCRETING BRACKET AND -PLATFORM FOR TWIN WALLS ANCHORING TECHNOLOGY TECHNICAL DATA: Concreting bracket Item No. set complete: bracket for twin walls with railing posts – max. single load: 150 kg / bracket – max. area load: 150 kg / m2 – max. distance of brackets: 1.50 m, min. distance of edge to joint 25 cm – concrete panel: min. 5 cm, max. 9.5 cm thick – wooden timbers: floor timbers min. 20 x 3.5 cm – side protection: 3 or 4 wooden timbers 15 x 3 cm Weight [kg/unit] to hang in at the internal or external side, hot galvanized. Plastic installation-kit with special plug Weight [kg/unit] Inserted...

CONCRETING BRACKET AND -PLATFORM FOR TWIN WALLS CONCRETING WORKING PLATFORM Your benefits at a glance: G Platform completely galvanized for long life service Consoles foldable for better storage and transport Length of platform 2.40 m, perfect size for transportation with truck Insertable security girder at the back and sides Quick and easy mounting With perforated metal planks the bothsided punched holes allow an excellent standing stability. Furhtermore the drain holes exhibit good drainage. Optionally with front side protection With accessories for safe attachment of the STAFE steep stair...

CONCRETING BRACKET AND -PLATFORM FOR TWIN WALLS CONCRETING WORKING PLATFORM Concreting working platform: mounting and installation Easy mounting: The working platforms are 100% compatible and can be stacked without any problems for storing and transportation. For mounting the first unit must be lifted 1 meter with the crane, the two consoles must be placed in vertical positon and secured with the telescopable back side protection therefore they cannot slip laterally. The assembly is easy and quick in a few working steps. The platform is immediately ready for use. ATTENTION: before hanging in...

CONCRETING BRACKET AND -PLATFORM FOR TWIN WALLS CONCRETING WORKING PLAFORM TECHNICAL DATA: Concreting working platform, steel floor, galvanized, complete with telescopable back side protection Specification Working platform consisting of 2 consoles with steel planking back protection, telescopable, and linch pins Front end side protection Item No. Weight [kg/unit] concreting bracket and working platform for twin walls

CONCRETING BRACKET AND -PLATFORM FOR TWIN WALLS ACCESSORIES: SAFE MOUNTING TECHNICAL DATA: Adapterrail for fixing STAFE stairways Weight [kg/unit] Stairway angle for fixing STAFE stairways Weight [kg/unit] 40 Adapter for fixing STAFE steep stairs SW30 Products subject to technical changes

CONCRETING BRACKET AND -PLATFORM FOR TWIN WALLS ACCESSORY: STAFE CONSTRUCTION STAIRWAYS TECHNICAL DATA: STAFE construction stairways made of aluminium, height-adjustable Weight [kg/unit] Handrail to insert For Type Weight [kg/unit] concreting bracket and working platform for twin walls

CONCRETING BRACKET AND -PLATFORM FOR TWIN WALLS ACCESSORY: STAFE STEEP STAIRS TECHNICAL DATA: Construction steep stairs made of aluminium, height-adjustable Weight [kg/unit] Products subject to technical changes

CONCRETING BRACKET AND -PLATFORM FOR TWIN WALLS CLAMP FOR TWIN WALLS Clamp for twin walls A simple solution for a quick mounting of the edge protection at twin walls during armoring works and concreting of slabs. Also for the clamp for twin walls the plastic installation kit has to be used. The big advantage: During the concreting of the slab the clamp for twin walls guarantees a safe protection with the inserted railing post. After hardening of the concrete the clamp for twin walls can be dismounted immediately and be used again for the next stage. So the plastic installation kit remains inside...

CONCRETING BRACKET AND -PLATFORM FOR TWIN WALLS CLAMP FOR TWIN WALLS TECHNICAL DATA: Clamp for twin walls Weight [kg/unit] Plastic installation-kit with special plug Weight [kg/unit] Inserted railing post Weight [kg/unit] Products subject to technical changes

Berlin office: Date of issue: June 2023