2.1. NON-RECOVERABLE FORMWORK
12Pages

{{requestButtons}}

Catalog excerpts

2.1. NON-RECOVERABLE FORMWORK - 1

2.1. NON-RECOVERABLE FORMWORK casings, L-shaped box and tubes for cut outs

Open the catalog to page 1
2.1. NON-RECOVERABLE FORMWORK - 2

NON-RECOVERABLE FORMWORK CASINGS FOR CUT-OUTS WITH TRAPEZOID PROFILING Your benefits at a glance: G Casings with wave and trapezoid profiling Non-recoverable formwork for economically creating recesses for sleeve and block foundations – supplied ready to install G With a trapezoid profile t = 2 cm for the safe static transmission of punching shear forces by means of a shear interlocking system with block foundations G With a corrugated profile for joints with sleeve foundations G Dimensions from 200 x 200 mm up to 1,500 x 1,500 mm side lengths; all measurements in between are manufactured...

Open the catalog to page 2
2.1. NON-RECOVERABLE FORMWORK - 3

NON-RECOVERABLE FORMWORK CASINGS FOR CUT-OUTS WITH TRAPEZOID PROFILING Trapezoid casing as foldable casing Because of a special punching technique the delivery as foldable cut out casings in folded out tabular form is possible. With this possibility we are offering an interesting and economical solution. Because of the extreme reduction of the transport volume you will save transport- and storing costs. Unwinded metal sheets are easily and quickly folded on the building site, and closed at the open corner by bending the overstanding metal plates. At a side length of more than 600 mm a...

Open the catalog to page 3
2.1. NON-RECOVERABLE FORMWORK - 4

NON-RECOVERABLE FORMWORK CASINGS FOR CUT-OUTS WITH WAVE PROFILING Casing with wave profiling additional height of foundation Big depth of excavation: production of foundation in 2 steps of concreting At this type of foundation the foundation block is concreted in a second pouring step. The profile does not serve as a shearing force transmission but only for the production of a ”rough joint”. That means, that the entire vertical load of the column will be transmitted into the foundation block by soil pressure at the column base. For the producing of the foundation in two steps we recommend...

Open the catalog to page 4
2.1. NON-RECOVERABLE FORMWORK - 5

NON-RECOVERABLE FORMWORK SPECIAL CASINGS Special casings for cut outs – examples Casing ready to mount with lateral filling chute and traversing steel girder Special casing with cut out for base deepening for machine foundations Various special casings Special casings to produce cavities in the slab, especially adapted variations for different slab inclinations Products subject to technical changes

Open the catalog to page 5
2.1. NON-RECOVERABLE FORMWORK - 6

NON-RECOVERABLE FORMWORK L-SHAPED FORMWORK BOX Your benefits at a glance: G Non-recoverable formwork for creating floor openings economically Can be mounted and fixed to the formwork in less than a minute! No troublesome measuring and cutting wooden shuttering panels Galvanised sheet metal; the formwork box remains in the concrete; no formwork stripping necessary! No wood waste any more; no more expensive disposal! The trapezoidal profile guarantees secure bonding with the mortar – no need for time-consuming reinforcement connections! Space-saving transport and storage thanks to L brackets...

Open the catalog to page 6
2.1. NON-RECOVERABLE FORMWORK - 7

NON-RECOVERABLE FORMWORK L-SHAPED FORMWORK BOX Easy installation and mounting in less than 45 seconds: on filigree slabs: on wooden slabs: The angles are delivered in single parts and are ready to use in no time at all. On element slabs the casings will be fixed with wire to the reinforcement. The casing will be nailed directly to the wooden casing with nailing attachments. 45 seconds An inconvenient striking is not necessary. TECHNICAL DATA: L-shaped formwork box, standard sizes Type dimensions B x L [mm] Variations for assembling in mm: Type 1: 200 x 200 / 200 x 150 Type 2: 250 x 300 /...

Open the catalog to page 7
2.1. NON-RECOVERABLE FORMWORK - 8

NON-RECOVERABLE FORMWORK RECESS TUBES FOR CUT-OUTS Your benefits at a glance: G Non-recoverable formwork for inexpensively creating recesses and openings for supply lines in beams and floors Standard dimensions of the round tubes: Ø 40 mm up to 1,000 mm; quadratic tubing 58 x 58 mm up to 200 x 200 mm Supply length 5 m (stock length) and in specific lengths according to customer request sawed ready to install – also with angled cuts if needed Any transportable length available on request Round tubes with profiles both on the inside and out, giving a perfect shearing bond and great mechanical...

Open the catalog to page 8
2.1. NON-RECOVERABLE FORMWORK - 9

NON-RECOVERABLE FORMWORK RECESS TUBES FOR CUT-OUTS TECHNICAL DATA: tubes for cut outs round, normal steel quadratic*, normal steel rectangle*, normal steel B B+8 * These tubes are not profiled on the inside. This means a shearing bond as with round tubes between grout and surrounding concrete is not possible! Therefore these kind of tubes are not suitable for anchoring traction loads. Products subject to technical changes

Open the catalog to page 9
2.1. NON-RECOVERABLE FORMWORK - 10

NON-RECOVERABLE FORMWORK RECESS TUBES FOR CUT-OUTS AND ACCESSORIES Fastener to wooden or steel foundations (steel covers available on request) Plastic cover with flange Plastic closing cover without flange For nailing to wooden casings and to close the tube ends, reusable. The tube is protected stirdy against uplift and moving in walls und beams by fixation on both ends. Important when ordering cut tubes: The thickness of flange ”T” of the closing cover must be deducted of the total length! To close the tube ends, reusable. If the covering on top should be stable we recommend the use of...

Open the catalog to page 10
2.1. NON-RECOVERABLE FORMWORK - 11

NON-RECOVERABLE FORMWORK ROUND CUT-OUT TUBES: FIXING TECHNICAL DATA: Plastic closing cover yellow, with flange Plastic closing cover even surface, without flange Plastic closing cover recessed surface, without flange Rubber spanner for fixing the round tubes for cut outs to steel formwork Products subject to technical changes

Open the catalog to page 11
2.1. NON-RECOVERABLE FORMWORK - 12

Berlin office: Date of issue: January 2020

Open the catalog to page 12

All ROBUSTA-GAUKEL GmbH & Co. KG catalogs and technical brochures