ANCHORING SET FOR FOUNDATIONS GENERAL INFORMATION center point Mounting frame with central template, it defines always the central point in the anchoring group, also with quadruple or sextuple sets. anchoring set for foundations and accessories

ANCHORING SET FOR FOUNDATIONS GENERAL INFORMATION Your benefits at a glance: G For anchoring all types of steel structures, high-rack systems, machines and concrete components With general building authority approval Appr ov for s al exten eism ded ic in 20 impact 20!t Anchoring proved in practice for tie bars with centimetre tolerances in concrete construction work and millimeter tolerances in steel Up-to-date force transmission using a shear force interlocking system; no cumbersome traversing anchor bars. No costly welding jobs necessary Permissible service loads from 15 kN to 400 kN per anchor...

ANCHORING SET FOR FOUNDATIONS PLANNING Anchoring in chapped concrete is permissible Safe holding of transverse loads and bending moments G Written proposal requests available, transparency from the beginning for all involved when determining the construction branches G Making out of detections without problem and acceptance by an engineer G With the official approval of the construction supervision the direct local initiation of forces is proven. The passing on of the loads to anchor in the construction part has to be proven separately. More details can be found in the official approval of the...

ANCHORING SET FOR FOUNDATIONS PLANNING Tie rods 8.8, galvanized Tie-rods, fine steel geometrical data geometrical data projecting Ø length tube above internal tie rod [mm] [mm] total anchoring depth tube with base and cover [mm] Projecting Ø Ø Ø total anchoring length tube tube anchordepth tube above internal external plate with base tie rod [mm] [mm] [mm] and cover [mm] [mm] For the following kinds of failure the characteristic values are fixed: for transverse load: – with and without lever arm For tension load: – failure of steel tie rod – break of concrete on the side load turned off – break...

ANCHORING SET FOR FOUNDATIONS CONCRETE CONSTRUCTION Mounting in construction with concrete G installing of the ROBUSTA-anchor tubes into concrete foundations and base plates easy and exact installation because of also delivered installing helps quicker installation because of 2 or 4 tubes on one base plate as a set natural stability because of profiling of the tubes The tubes will be delivered to the site welded onto a base plate single or as a set in batteries of 2, 3, 4 or 6 tubes ready to install. The advantage of an installation of a set is that with one measurement all tubes are automatically...

ANCHORING SET FOR FOUNDATIONS CONCRETE CONSTRUCTION Easy mounting in 3 steps: 1st step: measurement and fixing of the installation frame The transposition point of the anchoring axes has to be marked on the clean layer. After placing of the lower reinforcement the mounting frames will be placed at the marked axis points and fixed to the reinforcement. Tipp: marking of the axis center point with the help of a bored tie rod. The central template will be slipped onto the rod and the correct position is guaranteed automatically! 2nd step: installation of the tubes as a set The anchoring set will...

ANCHORING SET FOR FOUNDATIONS STEEL CONSTRUCTION Installation in steel construction: G Exact and easy measuring of the anchors on the hardened concrete surface Easy and exact installation and pouring with also delivered installation templates Quick installation with pre-mounted anchor bars with anchor plates High installation security because of identical color markings inside the tubes and at the anchor bars Great stability because of profiling of the tubes Safe pouring because of flowing, not shrinking firm mortar. After producing the base plate or the foundation the axis of the steel construction...

ANCHORING SET FOR FOUNDATIONS STAHLBAU The tubes will be filled with the ROBUSTA grout for anchoring, which is optimized for size of grain and consistence. After hardening of the grout the construction to connect can be anchored with a defined pretension. Please note the processing hints printed on the bag. The marking of the anchor bars is still visible on the upper end after installing and allows the inspector a subsequent controlling of the anchoring at any time. Pouring the grout into the tubes Exact mounting with fitting installation template Tie rods 8.8, galvanized Max. torque when fixing...

ANCHORING SET FOR FOUNDATIONS DELIVERY PROGRAMME A): SHELL / CONCRETE CONSTRUCTION Anchoring set, complete with closing cover above single material* Number of tubes/set Diameter of tie rods *8 for tie rods 8.8, 2 für tie rods made of fine steel Exmaple for order: 158424 Quadruple anchoring set for the installation with height adjustable mounting frame The measurements of the anchor tube are also included in this statements at Ø 150 x 459 mm for tie rods 8.8 galvanized, size M 24 (see the table on page 5) Example for order: 152224 Double anchoring set for the installation with height adjustable...

ANCHORING SET FOR FOUNDATIONS DELIVERY PROGRAMME B): FOR STEEL CONSTRUCTION anchor bars and pouring grout Item No. 16 Material* Number of tubes/set Diameter of tie rods *8 for tie rods 8.8, 2 for tie rods made of fine steel Example for order: 168424 Includes 4 sets of tie rods 8.8 galvanized, size M24, complete with mounted anchor plate, per set 2 nuts and 2 supporting disks, enclosed loose (see the table on page 4). Example for order: 162224 2 sets of tie rods A4, fine steel, size M24, complete with mounted anchor plate, per set 2 nuts and 2 supporting disks, enclosed loose (see the table on...

Berlin office: Date of issue: January 2020