Catalogs >
Robert Allen/Beacon Hill >
ROBIN DLF Wash leaflet

ROBIN DLF Wash leaflet
2Pages

Catalog excerpts

This perfect companion to the ROBIN DLX, the new ROBIN DLF Wash is based on the same RGBW LED module. With a perfectly smooth output via the front fresnel lens, this fixture has been optimized for those wanting an even light output with no shadows. (RGB breakups and shadows are not present even when on closely positioned trussing or other objects.) Mechanical features include a newly designed linear motorized zoom of 5.5°-60° and a diffusion filter for extension of the zoom up to 75°. The fixture uses a beam shaping module for creating different rectangular and square soft edged shapes, which also simulate barn door effects. The module consists of four individually controllable blades and is rotat- able by rotatable by 180 degrees. Advanced software features include RGBW or CMY colour mixing, a set of calibrated whites, CTO, tungsten lamp emulation (amber shift) and more. ROBIN DLF Wash ¡sable to produce 4300 from pastel =1 Light source: RGBW High power LED module Optical System and effects =i RGBW or CMY colour mixing mode =i Beam angle: 5.5°- 60°, 20°- 75° with diffusion filter =i Beam shaping module with four individually controllable blades. =i Beam shaping module rotatable by 180° =i Virtual colour wheel with pre-programmed 237 colours □ Tungsten lamp effect at whites 2.700 K and 3.200 K =i Colour rainbow effects in both directions with variable speed =i Strobe effect with variable speed (max. 20 flashes per second) Electrical Specification =i Power supply: Electronic auto-ranging □ Input voltage range: 100-250 V, 50/60 Hz □ Max. power consumption: 520W @ 230V/50Hz (RGBW=full) =i Typical power consumption: 160W-215W (one colour =full) Mechanical Specification ^ Height: 681 mm (26.8") - head in vertical position ^ Depth: 483 mm (19.0") - head in horizontal position ^ Fixation option: Pan/Tilt-lock mechanism □ Setting & Addressing: ROBE Navigation System 2 (RNS2) * □ Protocols: USITT DMX-512, RDM, ArtNet, MA Net, MA Net2 =i Wireless CRMX™ technology from Lumen Radio =i 3-editable programs, each up to 100 steps =i QVGA Robe touch screen with battery backup gravitation sensor for auto screen positioning operation memory service log with RTC =i Movement control: Tracking and vector □ RGBW (CMY), 8 or 16 bit colour mixing =i Beam shaping module rotation: 8 bit =i Beam shaping blades movement: 8 bit =i 41 beam shaper macros =i Theatre mode for silent operation =i Ethernet port: Art-Net protocol, ready for ACN =i Data in/out: Locking 3-pin & 5-pin XLR =i Power input: Neutrik PowerCon =i Built-in analyser for easy fault finding =i Maximum ambient temperature: 45 ° C (113 ° F) =i Maximum housing temperature: 90 °C (194 ° F) murvting points: 2 pairs of 1A-turn locks = 2x Omega bracket with 1A-turn quick locks Shaping module Robin DLFWash uses a beam shaping module for creating different rectangular and square soft edged shapes, which also simulate barn door effects. The module consists of four individually controllable blades and is rotatable by 180 degrees. (Patent pending). Precisely unified and very powerful color output of our new light source module utilizes unique combination of RGBW high powered single chip LEDsfor per- fect projection, while drawing very little energy and lasting for amazing 20.000 hours. The LED module is combined with an advanced heat management for very silent operation. (Patent pending). True White Spotless colormixing of specially calibrated LEDs together with predefined values on a Virtual Colour wheel channel allow quick direct calling of exact In the Halogen lamp mode predefined for White Halogen channel initiates halogen lamp-like behaviour (red effect and thermal delay) during dimming.

Open the catalog to page 1