riv ds t tape
8Pages

{{requestButtons}}

Catalog excerpts

riv ds t tape - 1

T-Tape Drip Tape Product Line Information Key Features Superior Material Strength Dripper Inlet Filters Turbulent Flow Path Slit Outlet Models T-Tape T-TapeS Applications Surface Under Mulch (buried) Subsurface Options Diameters: ⅝”, ⅞”, 1⅛”, 1⅜” Wall Thickness: 5 - 15 mil Flow Rates: 0.11- 1.34 gpm/ 100 ft. Average Roll Weight: 65 lbs. One of the most recognized and trusted drip tape brands in the world, T-Tape Drip Tape is used in a variety of crops around the world helping to reduce water consumption, increase crop quality, and increase crop yields. T-Tape Drip Tape can be installed on the ground, under plastic, or even subsurface. Because of T-Tape’s material strength, design, and quality production standards, it’s the drip tape that you can count on year after year. T-Tape is available in a wide assortment of configurations, including various lengths, wall thickness, dripper spacing

Open the catalog to page 1
riv ds t tape - 2

%" Standard diameter size with the largest selection of models. Includes high flow rate models typically used in crops like flowers or peppers. Generally used in applications with tight plant spacing. %" Provides longer run lengths then standard diameter models. The 7/8" models are used with crops that have a tight plant spacing and lower flow requirements or long runs of crops with larger spacing. Typical crops include leafy greens and vegetables. 1/" Models with a 1 /" diameter are generally made with medium flow rates and are used in crops that require normal flow and have standard plant...

Open the catalog to page 2
riv ds t tape - 3

T-Tape Drip Tape Spacing Selection Flow Rate Selection 4 inch Generally used with crops that have a tight plant spacing and require a high flow rate. The 4 inch spacing delivers the best wetting pattern in sandy soils and is typically used in shorter run lengths. This spacing is used in greenhouses or in open fields with crops such as flowers or peppers. Best infiltration rate in heavy soils. The ultra low models provide the longest possible length of runs for a given dripper spacing. These models also require the highest level of filtration to protect from plugging. Low (0.11 - 0.16...

Open the catalog to page 3
riv ds t tape - 4

T-Tape Drip Tape Flow Rate vs. Pressure - T-Tape Drip Tape Flow Rate vs. Pressure - T-Tape Drip Tape * This indicates the tape flow rate at 8 psi. T-Tape Use Tips Design Considerations Evaluate field conditions, including slope, soil type, and water quality. Understand plant requirements for irrigation. Install proper filtration for efficient operation of the system. Determine and install proper filtration based on water quality, water source and dripper flow rate. Install proper air and vacuum relief devices in the appropriate loca- Operating Guidelines Minimum operating pressure: 4 PSI...

Open the catalog to page 4
riv ds t tape - 5

New T-TapeS Models Introducing the newest set of T-Tape Drip Tape models - T-TapeS. These new models are engineered with extra tensile strength, allowing growers to more efficiently extract drip tape from the field. T-TapeS Drip Tape models are available in flow rate and spacing combinations typically used in longer fields or in rotated crops, where extracting the drip tape is more arduous. T-TapeS models are ideal choices for crops such as garlic, cotton, and onions. T-TapeS models can be identified with a gray stripe and with the T-TapeS designation on the label. Minimum operation * Flow...

Open the catalog to page 5
riv ds t tape - 6

T-Tape Drip Tape Operating Data Product Information Minimum operation pressure: 4 psi Rolls per pallet: 16 * Flow rates calculated at 8 psi. ** Length of runs calculated using Hydraulic Tool.

Open the catalog to page 6
riv ds t tape - 7

* Flow rates calculated at 8 psi. ** Length of runs calculated using Hydraulic Tool.

Open the catalog to page 7
riv ds t tape - 8

T-Tape Drip Tape T-Tape - 1⅛” Operating Data Wall Spacing Flow Rate* Minimum operation pressure: 4 psi Rolls per pallet: 12 Roll length Item Number Recommended Filtration T-Tape - 1⅜” Operating Data Wall Spacing Flow Rate* Minimum operation pressure: 4 psi Rolls per pallet: 12 Roll length Item Number Flow Rate* Recommended Filtration Max. Flush Max. Length Pressure of Run** (psi) * Flow rates calculated at 8 psi. ** Length of runs calculated using Hydraulic Tool. Rivulis.com This literature has been compiled for worldwide circulation and the descriptions, photos, and information are for...

Open the catalog to page 8

All Rivulis catalogs and technical brochures

  1. SD115

    2 Pages

  2. RIV BR D1000

    4 Pages

  3. katif int

    2 Pages

  4. RIV BR H6000

    4 Pages