Whirlpool 4 Button
Whirlpool 4 Button
- Safety Regulations: Electrical installations must comply with national regulations and be performed by certified professionals. Installations should be outside danger zones.
- Whirlpool Installation: Made from acrylic with customizable systems. Ensure all components are checked for defects before installation.
- Delivery: Systems are pre-assembled and tested. Inspect for damage before installation.
- Preparatory Work: Includes ventilation, inspection hatches, water supply, drainage, and electrical connections.
Details on the material and system options available.
Guidelines for regular upkeep to ensure longevity and performance.
- Electronic Control: Includes settings for standard operation, color therapy, aero and hydro systems, Bluetooth music, and automatic drying.
- Aero Jets: Types include Sparkle, Easy, and Flat aero jets.
- Hydro Jets: Includes standard and Hydro Lux jets.
- Disinfection and Cleaning: Regular cleaning protocols.
- User Tips: Recommendations for safe and effective use.
Instructions for handling unusual maintenance scenarios.
Procedure for requesting service support.
Details on warranty coverage and limitations.
- Connection Diagram: For single and dual hydromotor systems.
- Error Messages: Troubleshooting common issues.
The installation requires a separate additional bonding wire from the main potential connection of the building or the switchboard. This wire should have a solid core with a minimum cross-section of 4-6 mm² and green-yellow insulation.
- Electronic Control: Fill the bathtub to 5 cm above the highest nozzle for the hydro system and 15 cm below the edge for the aero system. Avoid using electrical devices during operation to prevent danger.
- Standby Mode: Icons on the control panel are not visible. Touching the panel activates the system, making icons visible. If no interaction occurs within 30 seconds, it returns to standby.
- Color Therapy: Activate by touching the control panel button. The lamp changes colors automatically. To fix a color, touch the button for 2 seconds.
- Aero Function: Activate by touching the control panel button. The aero pump starts at the highest speed (level 5). Speed can be adjusted by holding the button for 2 seconds.
- Hydro Function: Activate by touching the control panel button. The hydro pump operates only when the bathtub is sufficiently filled.
- Music/Bluetooth Function: Activate by touching the control panel button. It requires a Bluetooth connection to function.
- Aero Jet: Releases air for a relaxing effect. The Sparkle aero jet offers finer bubbles, while the Easy and Flat aero jets have chrome finishes.
- Hydro Jets: Mix water and air for a massaging effect. The Hydro jet and Hydro Lux jet have adjustable flow and chrome finishes.
Clean with a damp sponge and mild detergent. Small scratches can be repaired with chrome and lacquer polish. For larger damages, professional repair is recommended.
The system will not activate if there is insufficient water to prevent dry running. The motor has thermal protection.
The document outlines the installation procedures for RIHO whirlpool baths, emphasizing the importance of adhering to safety regulations. Electrical installations must be outside designated danger zones, and the installation should be performed by certified professionals. Pre-installation actions include ensuring proper ventilation, inspection hatches, and electrical connections.
The document addresses several common issues with whirlpool systems, such as non-functioning jets and cleaning systems. Solutions include checking water levels, resetting electronics, and ensuring proper connections. For persistent issues, contacting the service department is recommended.
Technical specifications include power connection details and failure descriptions. Regular maintenance, including cleaning and disinfection, is crucial for optimal performance. The document also provides guidelines for exceptional maintenance and service requests.
For service requests, users are advised to contact their dealer. The document highlights the importance of following installation guidelines to maintain warranty coverage. Current guarantee terms are available on the RIHO website.
The document includes diagrams for electrical connections and control box indicators, providing visual guidance for installation and troubleshooting.
1.0 Installation of RIHO Whirlpools
Ensure compliance with national guidelines for electrical installations in bathrooms. Electrical equipment must be installed outside danger zones, with no installations within 60 cm around the bath and less than 225 cm above it. The installation must be performed by certified workers following the provided assembly instructions.
Ensure all electrical components are inaccessible to bath users, and parts containing live components must not be available to the person in the bath. Regular testing and maintenance of current protectors are required.
Riho Whirlpool baths are made of acrylic and come with a system of the customer's choice. All systems are pre-installed and tested. Before installation, check for damage and protect the bathtub during installation.
All whirlpool systems are delivered fully installed and tested. Inspect for damage before installation, as post-installation claims are not covered.
Install ventilation grids and inspection hatches for motor access. Ensure proper water supply and drainage connections, and verify the whirlpool is undamaged before installation.
Use a metal support frame with adjustable legs to level the bath. Install overflow-drain combinations as per specifications. Ensure proper sealing with acid-free silicon sealant and check for watertight connections.
Install splash-proof ventilation grids to ensure motor operation, with a minimum effective flow surface of 100cm² for each system.
Install splash-proof hatches for maintenance access, ensuring they are large enough for service.
Panels must be removable and installed to meet ZONE 3 criteria, ensuring the space under the bathtub is not accessible without tools.
Install supply pipelines on the bath rim or wall, ensuring a maximum water temperature of 60°C.
Connect the drain pipeline with a siphon to the bathroom drain, ensuring proper drainage and sealing.
- Ensure the bath is filled with water up to the overflow rim and rests properly on all legs before sealing.
- Install a splash-proof ventilation grid with a minimum effective flow surface of 100cm² for each Hydro or Aero system, and 200cm² for combined systems. The grid should not vent in areas with temperatures below +15°C or above +35°C.
- Panels must be removable and installed to meet ZONE 3 criteria, ensuring the space under the bathtub is not accessible without tools.
- Inspection hatches must be splash-proof, at least 40x50cm, and positioned near each engine and heater with a 50 cm wide access space.
- Hot and cold water supply pipelines can be installed on the bath rim or wall. Maximum water temperature is 60°C. An aerator should be installed to prevent backflow.
- Connect the drain pipeline with a siphon to the bathroom drain pipeline, ensuring adequate drainage.
- Use a 3x1.5mm² cable, protected by a 10A circuit breaker and an earth leakage circuit breaker up to 30mA. Ensure disconnection of all poles in the fixed supply line.
- Install a potential difference equaliser with a solid core wire of 4-6mm², insulated in green-yellow.
- Clean the bath with a wet sponge or cloth and a non-abrasive liquid cleaner.
- Minor repairs can be done using a chrome and lacquer polisher or waterproof sandpaper. Major repairs should be handled by specialists.
- Fill the bath to the appropriate level before using the whirlpool system.
- Do not use electrical appliances while using the whirlpool.
- The system has a standby mode, and functions can be controlled via the panel. The default operating time is 30 minutes.
- Colour therapy, aero, hydro, and music/Bluetooth functions are available and can be controlled via the panel.
- Aero Jets: Provide air flow for a relaxing effect, with variations like Sparkle, Easy, and Flat aero jets, each with a chrome finish.
- Hydro Jets: Mix water and air for a massaging effect. Includes Hydro and Hydro Lux jets, with adjustable flow.
The document outlines the installation and operation of RIHO whirlpool systems, emphasizing compliance with EU regulations and national laws. Installation must be performed by a certified installer, ensuring proper electrical and water connections. The whirlpool should not be installed above 2000 meters altitude, and regular power supply checks are recommended.
The manual provides solutions for common issues:
- If the whirlpool does not work, ensure it is connected to the mains and the water level is adequate.
- For non-functioning mini back jets, reset the electronics by switching off the mains supply.
- If the cleanpool system fails, check and refill the cleaning liquid reservoir.
- For Bluetooth connectivity issues, disconnect any paired devices first.
Exceptional maintenance should be conducted by authorized service centers. The use of non-approved cleaning products can void the warranty. Safety tips include consulting a doctor before use if health issues exist, limiting use to 10 minutes, and avoiding use immediately after meals. Disinfection products should be handled with care, avoiding contact with skin and eyes.
Service requests should be directed to the dealer. An inspection hatch of at least 40x50 cm is necessary for maintenance. The guarantee terms are available on the RIHO website.
The document includes technical specifications for power connections and failure descriptions. The LED light on the control box indicates the connection status and functionality.
Hydrodüsen and Hydro-Luxdüsen have a complete chrome surface. The flow can be adjusted by rotating the inner part of the jet. For Hydro-Luxdüsen, turning clockwise reduces the flow strength.
The system will not start if there is insufficient water to prevent pump dry running. Motors are equipped with thermal switches to shut down in case of issues.
Use RIHO cleaning products for whirlpool systems. Recommended cleaning every 4-5 uses with RIHO cleaning fluid and tablets. For stubborn dirt, use soda for a deep clean.
Ensure power is off before maintenance. Only authorized personnel should perform repairs to maintain warranty and safety. Use only original or approved spare parts.
Common issues include system not starting, mini-back jets not working, and cleaning system failures. Solutions involve checking power connections, water levels, and ensuring cleaning fluid is present.
Consult a doctor if you have health issues before using the whirlpool. Recommended usage is 10 minutes. Avoid using soaps or shampoos during operation to prevent excessive foam.
Contact your seller for service requests. Ensure proper access and ventilation for maintenance.
Refer to the RIHO website for current warranty conditions.
Includes main power connections and control box specifications. LED indicators on the control panel provide status information.
The whirlpool bath system includes a control panel with touch-sensitive buttons that activate or deactivate functions. When a function is active, the button is illuminated brightly, and when inactive, it dims. The system can connect to Bluetooth for music playback, pausing automatically for phone calls.
The system features an automatic dry-blowing function that activates 15 minutes after the bath is emptied, cycling through levels 1 to 5. Additionally, a cleaning function is available for hotel bathtubs, activated by holding a button for 5 seconds.
Aero Jets: These jets emit air for a relaxing effect, with variations like Sparkle, Easy, and Flat Aero jets, each with a chrome finish.
Hydro Jets: These combine water and air for a massaging effect. The Hydro and Hydro Lux jets allow for directional and intensity adjustments.
The system includes dry-run protection and thermal protection for the motor. It will not activate without sufficient water.
Regular cleaning is recommended after 4-5 uses, using Riho cleaning products like tablets, soda, or liquid cleaner. Special instructions are provided for dealing with black flakes and for hotel bathtubs.
Common issues include the system not starting due to insufficient water or electrical connection problems. Solutions involve checking connections and water levels.
Consult a doctor before use if you have health issues. The recommended maximum usage time is 10 minutes.
- Do not use the whirlpool bath system immediately after a meal.
- Use bath foam, shampoos, or soap only after using the whirlpool system to avoid excessive foam.
- Keep out of reach of children.
- Avoid contact with face and eyes.
- Not for internal use.
- Rinse with water in case of contact.
- Do not inhale.
- Do not sit in the bathtub while products are added.
- Problem 1: Whirlpool does not operate after touching the control panel.
Solution: Check connection and water level.
- Problem 2: Back mini-jets do not work.
Solution: Reset electronics by turning off the main switch.
- Problem 3: Cleaning system does not work.
Solution: Ensure sufficient cleaning liquid in the tank.
- Problem 4: System does not start.
Solution: Reset electronics or check motor blockage.
- Problem 5 & 6: Bluetooth device issues.
Solution: Disconnect other devices from Bluetooth.
- Always cut power before maintenance.
- Contact authorized service for extraordinary maintenance.
- Use only original spare parts to maintain warranty.
- Connection diagrams for systems with one or two hydromotors.
- LED indicator meanings for control box status.
- Contact your dealer for service requests.
- Ensure inspection hatches are accessible.
- Refer to the website for current warranty conditions.
- RIHO International and regional offices contact details provided.
Catalog excerpts
Installation & user manual Installatie -& gebruikershandleiding Montage- & Bedienungsanleitung Manuel d'installation &d'utilisation
Open the catalog to page 1
Whirlpool 4 toets - Gebruikershandleiding Hoofdstuk Pagina 1.0 Installatie RIHO baden (whirlpools) .2 1.1 Veiligheidsvoorschriften voor badkamers .2 2.0 RIHO acryl baden (Whirlpools) 4.1.6 Automatisch droogblaas systeem .10 4.1.7 Reinigings functie (alleen voor hotel baden) .10 10.1 Aansluitschema (een hydromotor systeem) .14 10.2 Aansluitschema (twee hydromotoren systeem) .15
Open the catalog to page 3
Installatie RIHO baden (Whirlpools) De whirlpool installaties zijn volledig in overeenstemming met de EU voorschriften en de nationale wetgevingen die op dit gebied zijn gemaakt. LET OP: De installatie van het bad moet worden uitgevoerd door een erkend installateur. = De positie van de steunen en bevestigingsmiddelen is uniek voor elk bad en moet daarom worden toegepast op het meegeleverde bad. = De klant is eindverantwoordelijk voor goede constructie voorbereidingen, bekabeling en loodgieters werk. = Het gebruik van schoonmaakmiddelen met andere dan de door Riho voorgeschreven middelen kan schade...
Open the catalog to page 4
Whirlpool installatie Whirlpool 4 toets - Gebruikershandleiding Alle Riho whirlpool baden zijn gemaakt van acryl (zie beschrijving: acryl baden) en uitgevoerd met een whirlpoolsysteem naar keuze uitgezocht door de klant. Raadpleeg de Riho prijslijsten voor alle mogelijkheden. 1.3 Standaard worden alle whirlpool systemen compleet gemonteerd, functioneel getest en verpakt. LET OP: Verwijder voor de installatie de kartonnen verpakking en de folie om het bad zowel op eventuele schade te controleren als op materiaal en productie defecten. Bescherm het bad voldoende tijdens de installatie (b.v. met...
Open the catalog to page 5
=Bescherm het bad tijdens installatie tegen beschadiging (b.v. met karton, deken, folie, ...) =Bij het bad zit een metalen frame met 4 of meer verstelbare poten. Zorg er met de poten voor dat het bad waterpas staat en op de juiste hoogte is afgesteld en vergeet niet de contramoeren vast te zetten. Controleer of alle poten goed op de vloer steunen. = Monteer de afvoeroverloop combinatie in het bad indien nodig. Controleer of alle onderdelen goed zijn gemonteerd volgens de bijgesloten montage voorschriften van de fabrikant. =Het bad kan met behulp van een houten tengel aan de muur worden bevestigd...
Open the catalog to page 6
Whirlpool 4 toets - Gebruikershandleiding
Open the catalog to page 7
= Vul het bad voor de helft met water, en controleer of het bad nog steeds waterpas staat. Dit is noodzakelijk. Gebruik de stelpoten voor correctie. Controleer of de afvoerleiding waterdicht is aangesloten, daarna kunt u het bad bijvullen tot aan de overloop. Laat deze even overlopen en controleer de overloop op afdichting en op afwatering. = De open zijden van het bad kan op verschillende manieren worden afgewerkt zoals bijvoorbeeld met acryl panelen, of met een muurtje van tegels. Dit kan onder de gehele rand gebeuren, maar ook plaatselijk. = Voor het afdichten van badvoegen dient uitsluitend...
Open the catalog to page 8
Inspectie luik(en). Whirlpool 4 toets - Gebruikershandleiding электрический ящик электрический ящик Om onderhoud mogelijk te maken moet er in de badombouw of in de muur een spatwaterdicht inspectieluik worden aangebracht met een minimale afmeting van 40x50cm. Om service te kunnen verlenen is het noodzakelijk voor iedere motor een eigen luik aan te brengen. (Zie figuur 5.) Via uw dealer zijn Riho magneettegel-inspectieluiksetjes te bestellen. Zie de RIHO Technische Catalogus voor de exacte positie van de gaten. De Riho servicedienst kan geen service verlenen, indien er geen of te kleine inspectieluiken...
Open the catalog to page 9
1.5.6 Elektrische aansluiting De elektrische voeding voor de installatie moet worden voorzien van een geschikte kabel en de verbinding moet in een waterdichte doos worden gemaakt. De whirlpool wordt geleverd met een kabel van 3x1.5mm².De whirlpool moet worden aangesloten op een kabel van 3x1.5mm² 230V / 50Hz. De kabel moet worden beschermd door de juiste stroomonderbreker 10A met karakteristiek C en met een aardlekschakelaar tot 30mA. Het is noodzakelijk om te zorgen voor ontkoppeling van alle polen in de vaste toevoerleiding. De kabel moet worden beschermd door de juiste stroomonderbreker 10A...
Open the catalog to page 10
Ingeschakeld: Wanneer het systeem in standby mode staat en het paneel wordt aangeraakt zal het systeem aan gaan en zullen de icoontjes zichtbaar worden (gedimd). Als er dan geen verdere interactie met het bedieningspaneel is binnen 30 seconden zal het systeem weer terug in standby mode springen. Wanneer het systeem aan is kunnen de toetsen gebruikt worden om de bijbehorende functies aan en uit te zetten. Wanneer een functie aan is zal de toets opgelicht worden weergegeven (ongedimd). En wanneer de functie uit is zal de toets terugkeren in zijn gedimde stand. Uitgeschakeld: De standaard ingestelde...
Open the catalog to page 11
Men kan een Bluetooth apparaat vanaf 5 seconden na het opstarten van het systeem verbinden met SANJUN MUSIC, wat het Bluetooth kanaal van het bad is. Men kan eventueel de naam in het gekoppelde Bluetooth apparaat veranderen naar een andere gewenste naam. Zodra men succesvol is verbonden kan men de muziek via het gekoppelde Bluetooth apparaat starten. Raak de " "toets aan voor het (de)activeren van de muziek / Bluetooth functie of voor het koppelen. Wanneer de muziek via een telefoon aan het spelen is en men ontvangt een telefoongesprek dan zal de muziek automatisch stoppen en kunt u het gesprek...
Open the catalog to page 12
Whirlpool 4 toets - Gebruikershandleiding De Hydro jet heeft een geheel chromen afwerking. De uitstroom van de jets kan worden gericht, door de opening in het midden van de jet te kantelen naar de gewenste richting. Dit gaat redelijk zwaar. Dat is omdat anders de opening weer in de standaard rechte positie gaat staan als gevolg van de water- en luchtdruk. 5.2.2 De Hydro Lux jet heeft een geheel chromen afwerking. De uitstroom van de jet kan harder of zachter worden afgesteld. Het afstellen is mogelijk door het binnenste deel van de jet met de hand te draaien. Als het binnenste deel met de klok...
Open the catalog to page 13All RIHO catalogs and technical brochures
DEVOTION2 Pages
MODESTY1 Page
Whirlpool 1 Button64 Pages
BALTIC B20712 Pages
Whirlpool Electronic TLCD124 Pages
FromScratch - Solid 2.032 Pages
- Wash stand
- Light fixture
- Modern washbasin
- Industrial LED light
- Metal light fixture
- Commercial light fixture
- Washbasin cabinet
- Rectangular sink
- Modern washbasin cabinet
- Ceramic washbasin
- Countertop sink
- White bathtub
- Washbasin cabinet with drawers
- Linear light fixture
- Wooden vanity cabinet
- Wall-mounted vanity cabinet
- Self-supporting bathtub
- Surface-mounted light fixture
- Home light fixture