1. Catalogs
  2. RIHO
  3. Whirlpool 1 Button
video corpo

Whirlpool 1 Button

Whirlpool 1 Button
1 / 64 PagesView full catalog

Whirlpool 1 Button

Product catalog summary
Installation and User Manual Summary for RIHO Whirlpool Baths
Installation Guidelines
  • Safety Regulations: Electrical installations must comply with national guidelines, ensuring no electrical equipment is within 60 cm of the bath and 225 cm above it.
  • Installation Requirements: Must be performed by a certified installer. The customer is responsible for construction preparations, wiring, and plumbing.
  • Pre-Installation Checks: Inspect the bath and system for defects before installation. Post-installation defects are not covered under warranty.
Preparatory Work
  • Ensure ventilation grilles for motors with a minimum effective area of 100 cm² for each system.
  • Install inspection hatches for service access, ideally near motors, with a minimum size of 40 x 50 cm.
  • Ensure proper water supply and drainage, electrical connection, and potential equalization.
Operation
  • Electronic Control: Includes functions like Aero (AIR system), Hydro (FLOW system), and automatic drying system.
Maintenance
  • Regular cleaning and disinfection are necessary. Users should follow the recommended cleaning agents to avoid damage.
Safety and User Tips
  • System can be used by children and individuals with reduced capabilities under supervision.
  • Maximum operational altitude is 2000 meters.
  • In case of defects, contact RIHO service department.
Warranty and Service
  • Warranty does not cover damage post-installation. Service requests should be directed to RIHO.
Technical Data
  • Includes connection diagrams for AIR and FLOW systems and error messages.
Whirlpool Jets
  • Aero Jets: Sparkle and Flat aero jets with chrome finishes. The Flat aero jet can be disassembled for cleaning.
  • Hydro Jets: Combine water and air for a massaging effect. Jets can be adjusted for direction.
System Protection
  • Includes water level sensors and thermal protection for motors.
Cleaning and Disinfection
  • Use Riho cleaning products like tablets and soda for hydro systems. Aero systems do not require special cleaning products.
  • Regular cleaning is advised every 4-5 uses, with monthly cleaning for frequent use.
  • Major cleaning with soda is recommended if black flakes appear in the water.
User Tips
  • Consult a doctor before use if you have health issues.
  • Limit whirlpool use to 10 minutes.
  • Avoid using bath foam, shampoos, or soap during operation to prevent excessive foam.
Exceptional Maintenance
Always switch off power before maintenance. Ensure inspection hatches are accessible. Use only original spare parts to maintain warranty and safety.
Problem Resolution
  • If the whirlpool does not work, check power connections and water level.
  • For non-working mini-back jets, reset electronics by switching off and on.
  • For system start issues, reset electronics or check for motor overheating.
Service Requests
Contact your dealer for service. Ensure inspection hatches and ventilation grids are installed as per installation instructions.
Technical Specifications and Installation Instructions for RIHO Whirlpool Systems
Installation and Safety Guidelines
- Installation must be performed by a certified installer.
- Ensure compliance with national regulations regarding grounding, electrical installations, and bathroom safety standards.
- The whirlpool should not be installed directly against walls to prevent vibration transmission.
- Ventilation grids and inspection hatches are required for maintenance access.
- Electrical components must be installed to prevent accidental contact with water.
Technical Data
- Main power connection requires 230VAC/50Hz with a 10A fuse.
- Control box LED indicators: no light indicates improper connection, constant light indicates communication failure, and flashing indicates normal function.
Troubleshooting Common Issues
- If the system does not start, reset by switching off the main power for one minute.
- Ensure the water level is sufficient for operation; check the water level sensor if issues persist.
- For blocked motors, disassemble and clean the pump to prevent damage.
Maintenance and Service
- Regularly check power supply and connections for leaks.
- Contact the dealer for service requests and ensure the area is clear for technician access.
- Use only RIHO-recommended cleaning agents to avoid damage.
Safety Precautions
- The whirlpool should not be used by children under 8 years or individuals with reduced capabilities without supervision.
- Ensure all electrical installations are out of reach from the whirlpool area.
See more

Catalog excerpts

Whirlpool 1 Button-1

Návod k instalaci a manual Installation & userpoužití Instrukcja -& gebruikershandleiding Installatieinstalacji i obsługi Telepítési & Bedienungsanleitung Montage-és üzemeltetési kézikönyv Руководство по установке и эксплуата

 Open the catalog to page 1
Whirlpool 1 Button-3

Whirlpool 1 toets - Gebruikershandleiding Installatie- en bedieningshandleiding RIHO baden (whirlpools) Hoofdstuk Pagina 1.0 Installatie RIHO baden (whirlpools) .2 1.1 Veiligheidsvoorschriften voor badkamers .2 2.0 RIHO acryl baden (Whirlpools) 4.0 Bediening 4.1 Elektronische bediening 4.1.3 Aero functie (AIR systeem) 4.1.4 Hydro functie (FLOW systeem) 4.1.5 Automatisch droogblaas systeem 5.0 Whirlpool jets 5.1 Aero jets 10.0 Technische data 10.1 Aansluitschema (AIR systeem) 10.2 Aansluitschema (FLOW systeem)

 Open the catalog to page 3
Whirlpool 1 Button-4

Installatie RIHO baden (Whirlpools) De whirlpool installaties zijn volledig in overeenstemming met de EU voorschriften en de nationale wetgevingen die op dit gebied zijn gemaakt. LET OP: De installatie van het bad moet worden uitgevoerd door een erkend installateur. = De positie van de steunen en bevestigingsmiddelen is uniek voor elk bad en moet daarom worden toegepast op het meegeleverde bad. = De klant is eindverantwoordelijk voor goede constructie voorbereidingen, bekabeling en loodgieters werk. = Het gebruik van schoonmaakmiddelen met andere dan de door Riho voorgeschreven middelen kan schade...

 Open the catalog to page 4
Whirlpool 1 Button-5

Whirlpool installatie Whirlpool 1 toets - Gebruikershandleiding Alle Riho whirlpool baden zijn gemaakt van acryl (zie beschrijving: acryl baden) en uitgevoerd met een whirlpoolsysteem naar keuze uitgezocht door de klant. Raadpleeg de Riho prijslijsten voor alle mogelijkheden. 1.3 Standaard worden alle whirlpool systemen compleet gemonteerd, functioneel getest en verpakt. LET OP: Verwijder voor de installatie de kartonnen verpakking en de folie om het bad zowel op eventuele schade te controleren als op materiaal en productie defecten. Bescherm het bad voldoende tijdens de installatie (b.v. met...

 Open the catalog to page 5
Whirlpool 1 Button-6

=Bescherm het bad tijdens installatie tegen beschadiging (b.v. met karton, deken, folie, ...) =Bij het bad zit een metalen frame met 4 of meer verstelbare poten. Zorg er met de poten voor dat het bad waterpas staat en op de juiste hoogte is afgesteld en vergeet niet de contramoeren vast te zetten. Controleer of alle poten goed op de vloer steunen. = Monteer de afvoeroverloop combinatie in het bad indien nodig. Controleer of alle onderdelen goed zijn gemonteerd volgens de bijgesloten montage voorschriften van de fabrikant. =Het bad kan met behulp van een houten tengel aan de muur worden bevestigd...

 Open the catalog to page 6
Whirlpool 1 Button-7

Whirlpool 1 toets - Gebruikershandleiding

 Open the catalog to page 7
Whirlpool 1 Button-8

= Vul het bad voor de helft met water, en controleer of het bad nog steeds waterpas staat. Dit is noodzakelijk. Gebruik de stelpoten voor correctie. Controleer of de afvoerleiding waterdicht is aangesloten, daarna kunt u het bad bijvullen tot aan de overloop. Laat deze even overlopen en controleer de overloop op afdichting en op afwatering. = De open zijden van het bad kan op verschillende manieren worden afgewerkt zoals bijvoorbeeld met acryl panelen, of met een muurtje van tegels. Dit kan onder de gehele rand gebeuren, maar ook plaatselijk. = Voor het afdichten van badvoegen dient uitsluitend...

 Open the catalog to page 8
Whirlpool 1 Button-9

Inspectie luik(en). Whirlpool 1 toets - Gebruikershandleiding электрический ящик электрический ящик Om onderhoud mogelijk te maken moet er in de badombouw of in de muur een spatwaterdicht inspectieluik worden aangebracht met een minimale afmeting van 40x50cm. Om service te kunnen verlenen is het noodzakelijk voor iedere motor een eigen luik aan te brengen. (Zie figuur 5.) Via uw dealer zijn Riho magneettegel-inspectieluiksetjes te bestellen. Zie de RIHO Technische Catalogus voor de exacte positie van de gaten. De Riho servicedienst kan geen service verlenen, indien er geen of te kleine inspectieluiken...

 Open the catalog to page 9
Whirlpool 1 Button-10

1.5.6 Elektrische aansluiting De elektrische voeding voor de installatie moet worden voorzien van een geschikte kabel en de verbinding moet in een waterdichte doos worden gemaakt. De whirlpool wordt geleverd met een kabel van 3x1.5mm². De whirlpool moet worden aangesloten op een kabel van 3x1.5mm² 230V / 50Hz. Elke kabel moet worden beschermd door de juiste stroomonderbreker met karakteristieke C. Kabel 3x1.5mm² stroomonderbreker 10A. Het is noodzakelijk om te zorgen voor ontkoppeling van alle polen in de vaste toevoerleiding. Het scheidingselement moet contactafstanden hebben om ervoor te zorgen...

 Open the catalog to page 10
Whirlpool 1 Button-11

Whirlpool 1 toets - Gebruikershandleiding Ingeschakeld: Wanneer het bad is gevuld met water, bevindt het systeem zich in de stand-by stand. Wordt de knop aangeraakt, dan zal de binnenste lijn blauw oplichten. Als er een tekort aan water is, zal deze gaan knipperen. Nadat alle functies zijn uitgeschakeld, gaat deze terug naar de stand-by stand. Uitschakelen: De standaard bedrijfstijd is 30 minuten. Als er binnen deze 30 minuten geen verandering plaatsvindt, wordt het systeem automatisch uitgeschakeld en keert het terug naar de stand-by stand. De werktijd van 30 minuten start vanaf het moment waarop...

 Open the catalog to page 11
Whirlpool 1 Button-12

Zoals het woord Aero jet al zegt is dit een jet waar alleen lucht uit komt. De lucht dwarrelt uit de jet naar boven, wat een relaxerend effect heeft. De lucht uit de aero jet opening komt met een bepaalde snelheid het bad in. De lucht kan hierdoor als koud ervaren worden. Het jethuis zelf wordt enigszins warm. 5.1.1 De Sparkle aero jet heeft een chromen afwerking. Deze jet geeft een fijnere bubbel dan een regulier aero systeem. 5.1.2 De Flat aero jet heeft een chromen afwerking. Om de jet te reinigen kan men het binnenste deel er uithalen met behulp van een kleine fitting schroevendraaier. WAARSCHUWING:...

 Open the catalog to page 12
Whirlpool 1 Button-13

Whirlpool 1 toets - Gebruikershandleiding met reinigingsvloeistof en de tabletten. Maakt u weinig gebruik van de whirlpool, dan is het aan te raden om het bad voor gebruik te reinigen, zodat het systeem goed schoon is. 1. Clean Tabletten / Reinigingstabletten. Dit is voor het desinfecteren van het Hydro Systeem. U vult het bad tot net iets boven de bovenste jets. De eerste maal dat u de Clean Tabletten gebruikt, voegt u er vijf toe aan het water (voor vervolgbeurten volstaan twee/drie tabletten per keer). Zet het Hydro Systeem handmatig aan, uit en weer aan (1½ tot 2 minuten per keer, dit 4 tot...

 Open the catalog to page 13

All RIHO catalogs and technical brochures

  1. DEVOTION

    2  Pages

  2. MODESTY

    1  Page

  3. BALTIC B207

    12  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.