Solarunterkonstruktionen Solar substructures

Solarunterkonstruktionen Solar substructures lux Flex solar substructures Our solar substructures made of Magnelis®-coated hot-dip galvanised steel or aluminium (upon request) are characterised by their remarkably easy assembly and non-penetrative installation. What’s more, the flexible fixing elements ensure commercially available panel sizes also fit the substructures. In a nutshell: • ery easy to handle V Miralux systems are designed to save The space during transport and on site. • Fast and secure assembly Thanks to their prefabricated folding elements, the systems can be installed extremely...

Technical specifications for the east-west version Made in Germanyof mounting system Type Material Angle Shadow angle Lateral distances between modules Cable channel Preservation of structures (optional) Processing time non-penetrative, low-ballast mounting system for flat roof surfaces Magnelis®-coated* hot-dip galvanised steel 10° or 15° (< 15°) module-specific integrated (into the base support) EPDM or needle felting (pre-installed on request) incl. wiring approx. 10 mins per kWp (two-man inst.) * For more information about Magnelis® coatings, please see our website or contact us directly....

Solarunterkonstruktionen Solar substructures lux Flex solar substructures Our solar substructures made of Magnelis®-coated hot-dip galvanised steel or aluminium (upon request) are characterised by their remarkably easy assembly and non-penetrative installation. What’s more, the flexible fixing elements ensure all commercially available panel sizes also fit the substructures. In a nutshell: • Very easy to handle Miralux systems are designed to save The space during transport and on site. • Fast and secure assembly Thanks to their prefabricated folding elements, the systems can be installed extremely...

Technical specifications for the south-facing version Made in Germany of mounting system Type Material Angle Shadow angle Lateral distances between modules Cable channel Preservation of structures (optional) Processing time non-penetrative, low-ballast mounting system for flat roof surfaces Magnelis®-coated* hot-dip galvanised steel 10° and 15° (approx. 20° as standard) approx. 25mm integrated (into the base support) EPDM or needle felting (pre-installed on request) approx. 12 mins per kWp (two-man installation) * For more information about Magnelis® coatings, please see our website or contact...

lux Flex Ballast blocks for East-west and south-facing versions Our ballast blocks made from polymer concrete have a base area of 400 x 400mm and ensure a stable and safe installation of the solar substructures on gravel and green roofs. Besides the increased safety gained from fixing the solar substructures in place, they also ensure the photovoltaic system is professionally arranged on the roof. The blocks, which sit on top of the building protection mat, can be surrounded with gravel or roof planting after being installed. Moreover, they raise the solar substructures above the respective roof...

Green roof mounting systems for East-west version Made in Germany Besides facilitating the initial planting of green roofs in combination with photovoltaic systems, the additional mounting system can also be used to retrofit existing green roofs with solar panels. The system as such consists of the mounting system and the additionally required ballast blocks and is intended to be used with the eastwest version of the Miralux Flex. lux Green solar substructures for green roofs This solar substructure, which can be used for a south- or eastwest-facing photovoltaic system, is directly integrated...

Richard Brink GmbH & Co. KG Metalware Production and Sales Dennis Siek Richard Brink GmbH & Co. KG Görlitzer Straße 1 33758 Schloß Holte-Stukenbrock T +49 (0)5207 95 04-216 F +49 (0)5207 95 04-20 M [email protected]