Our breathable façade channel Stabile Air! Especially developed for the ventilation of insulation & wood Custom measur mentseUpo requent s

Stabile Air | Rear-ventilated façade channels Drained and ventilated façade base saves time and eliminates the cost-intensive need to establish conventional drainage. In addition to the standard channels in our product range, we also manufacture custom solutions to meet your specifications. Inlet widths and heights may vary as needed. The Stabile Air façade channel is especially suitable for protecting wood and insulated façades from moisture because it prevents capillary forces from forming, facilitates ventilation of the lower façade areas and properly redirects incoming water. Whether the...

Austria | Ellmau: Tirol Lodge The base areas of the buildings made of spruce and larch wood are drained and ventilated with Stabile Air facade channels. Denmark | Copenhagen: Kronen Vanløse The four-story, superimposed parts of the building on the Kronen department store consist of wooden structures with insulation and metal cladding. Here, too, Stable Air channels ensure residential building protection, particularly in the base area. Drainagesystems Richard Brink

Stabile Air | Rear-ventilated façade drain The Stabile Air ventilation façade drain prevents waterlogging and ensures constant ventilation to the façade. without grating Stabile Air | made of stainless steel (V2A) 1.5 mm Standard channel length: 1,000 mm, to 1,500 mm feasible using just one part Item designation Inflow width End fittings | stainless steel (V2A) Item designation Stabile Air | made of hot-dip galvanised steel 1.5 mm Standard channel length: 1,000 mm, to 1,500 mm feasible using just one part Item designation Inflow width End fittings | hot-dip galvanised steel Item designation

Cantilever Custommade

Stabile Air Outercorners | Rear-ventilated façade drain Custom measur mentseUpon request Outercorners | made of stainless steel (V2A) 1.5 mm Incl. channel bodies (‘plug-in’ channel system, no connectors needed) Inflow width Item designation Outercorners | made of hot-dip galvanised steel 1.5 mm Incl. channel bodies (‘plug-in’ channel system, no connectors needed) Inflow width Item designation Drainagesystems Richard Brink

Drainagesystems Richard Brink

Custom measur mentse- Stabile Air Innercorners | Rear-ventilated façade drain Upon request without grating Innercorners | made of stainless steel (V2A) 1.5 mm Incl. channel bodies (‘plug-in’ channel system, no connectors needed) Inner corner Inflow width Item designation Innercorners | made of hot-dip galvanised steel 1.5 mm Incl. channel bodies (‘plug-in’ channel system, no connectors needed) Item designation Inflow width Drainagesystems Richard Brink

Perforated gratings | for our dewatering systems Example: Drainage grating with round perforation | stainless steel (V2A) 1.5 mm Standard grating length: 1,000 to 3,000 mm feasible using just one part Item designation Item designation Example: Drainage grating with round perforation | hot-dip galvanised steel 1.5 mm All perforated gratings have the same prices depending on the inlet width – the choice is yours! slot perforation slot perforation slot perforation Grating locks for all perforated gratings | made of stainless steel (V2A) 1.5 mm for inflow width Item designation Grating locks for...

Mesh gratings | for our dewatering systems Drainage mesh grating | made of stainless steel (V2A) Standard grating length: 1,000 to 1,500 mm feasible using just one part Height Mesh openings Grating locks | made of stainless steel (V2A) Item designation Item designation Drainage mesh grating | made of hot-dip galvanised steel Standard grating length: 1,000 to 1,390 mm feasible using just one part Height Mesh openings Item designation Corner surcharge for gratings Leg length: 500 mm Made from running metres. Drainagesystems Richard Brink Grating locks | made of hot-dip galvanised steel

Designer gratings | for our dewatering systems Longitudinal bar drainage grating 7 × 7mm | made of stainless steel (V2A) Standard grating length: 1,000 to 1,500 mm feasible using just one part Height Item designation Grating locks | made of stainless steel (V2A) Item designation Longitudinal bar drainage grating Hydra Linearis | stainless steel (V2A) Standard grating length: 1,000 to 1,500 mm feasible using just one part for inflow width Item designation Grating locks | made of stainless steel (V2A) for inflow width Item designation Corner surcharge for gratings Leg length: 500 mm Made from running...

Designer gratings | for our dewatering systems Longitudinal bar drainage grating 20 × 3 mm | made of stainless steel Standard grating length: 1,000 to 1,500 mm feasible using just one part Item designation Grating locks | made of stainless steel (V2A) Item designation Longitudinal bar drainage grating 20 × 3 mm | hot-dip galvanised steel Standard grating length: 1,000 to 1,500 mm feasible using just one part for inflow width Item designation Item designation Corner surcharge for gratings Leg length: 500 mm Made from running metres. Drainagesystems Richard Brink Grating locks | made of hot-dip...

Designer gratings | for our dewatering systems Legato longitudinal bar drainage grating | made of stainless steel (V2A) Standard grating length: 1,000 to 1,500 mm feasible using just one part Item designation Item designation Grating locks | made of stainless steel (V2A) Staccato longitudinal bar drainage grating | made of stainless steel (V2A) Standard grating length: 1,000 to 1,500 mm feasible using just one part Item designation Item designation Grating locks | made of stainless steel (V2A) Ritmo longitudinal bar drainage grating | made of stainless steel (V2A) Standard grating length: 1,000...

Gemini | Double-slot gratings Double-slot gratings Gemini | made of stainless steel (V2A) 3,0 mm Standard grating length: 1,000 to 1,500 mm feasible using just one part Item designation Slot widths Two removal hooks are provided upon request. Double-slot gratings Gemini | made of stainless steel (V2A) 2,0 mm 97 mm Standard grating length:81,000 mm, with inlet for 20 mm thick stone inlay 8 mm mm Height from Stone width Stone height Slot widths Supporting base Item designation 97 DRR GS 250-33 mm 250 mm 33 mm* 8 mm 8 mm Two removal hooks are provided upon request. 73 mm * with 40mm total height...