*myarchiexpo

CW 60- DRL

Product catalog summary

Overview: The CW 60-DRL is a thermally insulated curtain wall system designed for optimal glazing solutions. It features pre-formed silicone gaskets for a flush façade appearance.

Specifications:

External and internal visible width: 62 mm
Vertical mullion depth: 150 mm to 180 mm
Horizontal transom depth: 81 mm to 179.5 mm
Inertia for mullions (wind load): 257.9 cm⁴ to 447.8 cm⁴
Inertia for transoms (wind load): 48.7 cm⁴ to 462.5 cm⁴
Inertia for transoms (glass load): 28.9 cm⁴ to 68.5 cm⁴
Rebate height: 20.25 mm
Glass thickness: 30 mm to 38 mm
Compatible with all types of TS and CS window and door vents, and sliding doors with a minimum integration depth of 30 mm; CS 77 vents are preferred.

Technical Characteristics: The system is produced by Reynaers Aluminium NV/SA.

Performance:

Energy: Thermal insulation is tested per profile combination according to EN 10077-2.
Comfort:
- Air tightness: A4 (EN 12153, EN 12152)
- Water tightness: R4 to RE 1200 (EN 12155, EN 12154)
- Wind load resistance: Up to 2000 Pa (EN12179, EN13166)

Notes: The Uf-value indicates the thermal insulation efficiency, with lower values representing better performance. Air tightness and water tightness are measured under specific conditions to ensure durability and resistance. Wind load resistance is tested to simulate real-world conditions, with higher numbers indicating superior performance.

Catalog excerpts

CW 60-DRL Curtain walls CW 60-DRL is a thermally insulated curtain wall system. Its glazing is fi xed using pre-formed silicone gaskets. This provides an optimal solution for the glazing and adds an exclusive, fl ush appearance to the façade.

Open the catalog to page 1

Style variants CW 60-DRL INSULATED External visible width 62 mm Exterior aesthetics pre-formed silicone frames Interior visible width 62 mm Depth vertical mullions from 150 mm to 180 mm Depth horizontal transoms from 81 to 179.5 mm Inertia mullions (lx: wind load) min 257.9 cm4 to max 447.8 cm4 Inertia transoms (lx: wind load) min 48.7 cm4 to max 462.5 cm4 Inertia transoms (ly: glass load) min 28.9 cm4 to max 68.5 cm4 Glazing fi xed by silicone frame Rebate height 20.25 mm Glass thickness from 30 mm to 38 mm Type of vents all types of TS and CS window and door vents, all types of sliding doors...

Open the catalog to page 2