resoltech *resoltech Decoflakes primer/clear topcoat/flakes Decorative pools, ponds and floor topcoat - Ready to use kit - Perfectly waterproof coating - Homogeneous and customizable finish - Wide range of flakes colours and sizes Datasheed V4 - 02.01.2018 / Previous version - 26.04.2016

INTRODUCTION RESOLTECH Decoflakes is a unique solvent free epoxy system. Thanks to its specific formula, it will allow you to achieve a homogenous and decorative coating with a granite like finish on all kind of substrates. Three coats are necessary to obtain the minimum thickness that will guarantee the mechanical and chimical restistances as well as the perfect sealing of the substrate. RESOLTECH Decoflakes is delivered in a three-components kit : - A water-based epoxy primer to seal the porous substrates (concrete, cement...). - A clear epoxy coating system(resin and hardener). - he flakes...

Decorative coat - Decorative coat must be achieved between 8 to 12h (at 20°C) after the primer coat. - Apply the decorative coat with a brush at a rate of 0.4kg/m². - Right after the application, throw the flakes on the resin at a rate of 0.6kg/m². Using of a flake gun is recommended however, this step can be achieved by hand. Flakes that fell on the ground can be re-used directly or later. Closing coat - Closing coat must be achieved 24h after step 2 without sanding nor degreasing. - Use a block of wood in order to flatten the flakes on the coating once hardened. - Apply the closing coat with...

Decoflakes A : Clear purple liquid Decoflakes B Clear liquid Visual aspect Mix : Clear purple liquid References Datasheed V4 - 02.01.2018 / Previous version - 26.04.2016

HEALTH & SAFETY Standard kit : - Decoflakes A 5Kg in a 5L plastic jerrican - Decoflakes B 2Kg in a 2L plastic jerrican - Decoflakes 20Kg bag QUANTITY REQUIRED For a surface of 100 m2 : - Primer, 2 kits of 4Kg of RESOLTECH 1010/1014. - Decorative coat, closing coat and finish coat, 17 Kits of 7Kg of Decoflakes A et B, 3 bags of 20Kg of Decoflakes. Skin contact must be avoided by wearing protective nitrile gloves & overalls or other protective clothing. Eye protection should be worn to avoid risk of resin, hardener, solvent or dust entering the eyes. If this occurs flush the eye with water for...