*myarchiexpo

1200

Product catalog summary

Introduction
RESOLTECH 1200 is a state-of-the-art epoxy laminating system designed for manufacturing small to large composite structures. It is formulated without reactive diluents, improving health and safety conditions. The system is compatible with various fibers and does not crystallize, meeting European regulations and REACH requirements. It supports applications like wet lay-up, vacuum bagging, and filament winding, with a thixotropic version available for vertical laminates.

Specifications
- Adjustable working time from 14 minutes to 8 hours 45 minutes.
- Excellent wetting with all types of reinforcements.
- Same mixing ratio for hardeners 1204, 1206, and 1208.
- TG up to 85°C after post-cure; 130°C with 1205HT & 1206HT hardeners.
- Recommended usage temperature: 18-25°C.

Mixing and Application
- Mixing ratio by weight: 100/35; by volume: 100/44, 100/43, 100/41.
- Accurate mixing ratio is crucial for optimal mechanical properties.
- Hardeners can be mixed to adjust reactivity.
- Post-cure at 60-80°C for optimal properties.

Reactivities
- Gel times vary based on hardener mix and temperature.
- Peak exothermic temperatures range from 43°C to 225°C.
- Hardeners are compatible for tailored reactivity.

Physical Characteristics
- Color: Colorless to yellow opalescent liquid.
- Density at 23°C: 1.16 for resin, varies for hardeners.
- Viscosity at 23°C: 6500 mPa.s for resin, varies for hardeners.

Curing and Post-Curing
- High-temperature hardeners 1205HT and 1206HT achieve TG of 124°C and 128°C respectively.
- Curing cycle: 24h at 23°C + 16h at 60°C.
- Maximum TG ranges from 86°C to 94°C depending on the mix.

Mechanical Properties
- Flexion modulus ranges from 3.09 GPa to 3.37 GPa.
- Traction modulus up to 3.59 GPa.
- Shore D Hardness: 87 to 89.
- Water absorption after 24h: 0.08% to 0.09%.

Packaging
- Available in various kit sizes from 1kg to 1t.

Transport and Storage
- Store between 10°C and 30°C in a well-ventilated area.
- Ensure containers are sealed and check expiry dates.

Health and Safety
- Avoid skin contact; use protective gear.
- Ensure adequate ventilation and use respiratory protection.
- Refer to Material Safety Data Sheets for detailed safety information.

Catalog excerpts

resoltech * MARITIME resoltech 1200 Hardeners 1204 - 1206 - 1208 Structural epoxy laminating system - Adjustable working time from 14min to 8h45min - Excellent wetting out with all type of reinforcements - Same mixing ratio for the 3 hardeners - Manufacturing of small parts to very large composite structures - Tg from up to 85°C after post cure - 130°C T_ with 1205HT & 1206HT hardeners G Datasheet V7 - 14.03.2023 / Previous version - 06.06.2019

Open the catalog to page 1

RESOLTECH 1200 / 1204 - 1206 - 1208 is a state of the art chemistry laminating epoxy system, formulated without reactive diluents (primary cause of allergies) thus improving the H&S working conditions. It allows to manufacture small parts as well as large composite structures & tools with all the existing fibers. RESOLTECH 1200 / 1204 - 1206 - 1208 does not crystallize, these systems do not contain any CMR components and meet the latest requirements of European regulation & REACH. With its adapted viscosity and its large range of reactivity, the system enables application by wet lay up, vacuum...

Open the catalog to page 2

Mix : Colorless to yellow opalescent liquid Opalescent colorless liquid Clear to yellow liquid Reactivity measurements are made on Rheotech ® *NR : Non Representative Datasheet V7 - 14.03.2023 / Previous version - 06.06.2019

Open the catalog to page 3

To obtain a material with its maximum thermal and mechanical properties as TG max, it is necessary to respect the recommended curing cycle. You will find in the spreadsheet below the temperature of TG & HDT in relation to the curing cycle. Reactivity measurements are made on Rheotech® TG realized on Kinetech® Datasheet V7 - 14.03.2023 / Previous version - 06.06.2019

Open the catalog to page 4

Tests realized on pure resin samples according to : Flexion / ISO 178 - Traction / ISO 527-2 - Hardness / ISO 868 - Water absorption / ISO 175 HEALTH & SAFETY PACKAGING - Plastic jerrycan kit of 1kg + 0.35kg - Plastic jerrycan kit of 5kg + 1.75kg - Plastic jerrycan kit of 28kg + 9.8kg - Drum kit of 200kg + 3 x 23.33kg - IBC kit of 1t + 2 drums of 175kg TRANSPORT & STORAGE Keep containers sealed and away from heat and cold preferably between 10°C and 30°C in a well ventilated area. Our products are guaranteed in their original packaging (check expiry date stated on the label). Skin contact must...

Open the catalog to page 5

All Resoltech catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list