1070S CLEAR

Product catalog summary

Introduction
RESOLTECH 1070(S) CLEAR is a high-end crystal clear epoxy laminating system designed for clear laminates and high gloss coatings with excellent UV stability and mechanical properties. It is suitable for manufacturing surfboards, wind-surfs, kite-boards, and other composite parts requiring a high-end finish. The system is formulated to be used with polyester topcoats without inhibition and cures at room temperature.

Specifications
- New UV resistant formula since January 2019.
- Suitable for structural laminates and topcoats.
- Offers ease of use with room temperature curing and self-leveling properties.
- Excellent degassing and wetting properties.
- Available in three reactivity options.

Application and Mixing
- Recommended workshop temperature: 18-25°C.
- Mixing ratio by weight: 100/40 or 100/45; by volume: 2/1.
- Accurate mixing ratio is crucial for optimal mechanical properties.
- Application methods include squeegee or brush.
- Surface preparation is necessary for laminating over cured surfaces without peel ply.

Reactivities and Physical Characteristics
- Viscosity and gel times vary with different hardeners (1074, 1076, 1077).
- Gel time ranges from 15 minutes to 3 hours depending on the system.
- Mixed density at 23°C ranges from 1.10 to 1.11.

Mechanical Properties
- Glass transition temperatures (TG) and Shore D hardness vary with curing cycles.
- Flexural modulus and strength are provided for different curing conditions.

Packaging
- Available in various packaging sizes from small jerrycans to large IBC kits.

Health & Safety
- Protective clothing and eye protection are recommended.
- Ensure adequate ventilation and use respiratory protection with ABEKP coded filters.
- Full Material Safety Data Sheets (MSDS) are available.

Transport & Storage
- Store between 10°C and 30°C in a well-ventilated area.
- Keep containers sealed and check expiry dates on labels.

Catalog excerpts

resoltech * resoltech 1070(S) CLEAR Hardeners 1074 to 1077 Clear epoxy laminating system - New UV resistant formula (January 2019) - For structural laminates and topcoats - Ease of use, room temperature curing, self-leveling - Excellent degassing and wetting properties - Polyester topcoat application without inhibition - Three choices of reactivity Datasheet V2 - 24.03.2022 / Previous version - 15.01.2019

Open the catalog to page 1

RESOLTECH 1070(s) CLEAR is a high end crystal clear epoxy laminating system formulated to produce clear laminates and high gloss clear coatings with good UV stability and high mechanical properties. Thanks to its new formulation(January 2019), 1070(s) CLEAR is now the best available UV resistance resin on the market. The 1070(s) CLEAR system is formulated for professionals who manufacture surf, wind-surfs, kite-boards, or any composites parts with high-end finish aspects requirements. On white foams (polystyrene and PU) the additive Optical brightener (sold separately) greatly improves the white...

Open the catalog to page 2

Mix : Clear purple liquid ym Visual aspect I 1070 CLEAR & 1070(S) CLEAR : I 1074 to 1077: Clear purple liquid Clear liquid Reactivity measurements realized on Trombotech® Datasheet V2 - 24.03.2022 / Previous version - 15.01.2019

Open the catalog to page 3

In order to obtain the maximum thermo-mechanical properties, it is necessary to respect the recommended curing cycle. The table below shows the glass transition temperatures (DSC) according to different curing cycles. Measurements on pure resin according to the following standard : ISO 178 Datasheet V2 - 24.03.2022 / Previous version - 15.01.2019

Open the catalog to page 4

HEALTH & SAFETY Skin contact must be avoided by wearing protective nitrile gloves & overalls or other protective clothing. Eye protection should be worn to avoid risk of resin, hardener, solvent or dust entering the eyes. If this occurs flush the eye with water for 15 minutes, holding the eyelid open, and seek medical attention. Ensure adequate ventilation in work areas. Respiratory protection should be worn with ABEKP coded filters. Resoltech issues full Material Safety Data Sheet for all hazardous products. Please ensure that you have the correct MSDS to hand for the materials you are using...

Open the catalog to page 5

1070S CLEAR

1070S CLEAR

Catalog excerpts

All Resoltech catalogs and technical brochures