*myarchiexpo

1020T

Product catalog summary

Introduction
RESOLTECH 1020 is a versatile epoxy laminating system suitable for wood-epoxy, concrete reinforcement, and metal constructions. It is particularly useful in boat building for various applications such as lamination and coating. The system offers a wide range of hardeners with adjustable pot life from 15 minutes to over 10 hours, allowing flexibility in application methods including wet layup and vacuum bagging. The 1020T version is thixotropic, ideal for vertical applications.

Specifications
The mixing ratio for all hardeners is 100:30 by weight, and they are compatible for mixing to achieve desired reactivities. The system is compliant with REACH regulations and is CMR-free, ensuring a safer workplace.

Physical Characteristics
The resin and hardeners have specific densities and viscosities at 23°C, with the resin being an opalescent liquid and hardeners ranging from neutral to limpid liquids.

Reactivities
The system offers various gel times and exothermic peak temperatures depending on the hardener used. Recommendations for hardener choice are provided based on ambient temperature conditions.

Reticulation & Post-Curing
To achieve optimal thermo-mechanical properties, specific curing cycles are recommended. Glass transition temperatures and Shore D hardness vary with different curing cycles.

Mechanical Properties
Flexion properties are detailed for both room temperature and post-cured conditions, showing variations in modulus, maximum strength, and elongation.

Packaging
The product is available in various packaging sizes, from small kits to large drums, with specific instructions for the 1020T version.

Health & Safety
Protective measures are necessary to avoid skin and eye contact. Adequate ventilation and respiratory protection are recommended. Full Material Safety Data Sheets are available.

Transport & Storage
Products should be stored in sealed containers at temperatures between 10°C and 30°C. They are guaranteed in their original packaging until the expiry date.

Catalog excerpts

Hardeners 1023S to 1029S Multipurpose Epoxy Laminating System New hardeners CMR free - Adjustable pot life from 15mn to 10h44min - Good elongation characteristics - Wide choice of reactivities (6 miscible hardeners) - Little sensitivity to humidity during application - Available in thixotropic version (1020T) Datasheet V4 - 12.10.2021 / Previous version - 10.07.2018

Open the catalog to page 1

RESOLTECH 1020 is a room temperature epoxy laminating system for wood-epoxy, concrete reinforcement and metal constructions that are inherently moving structures. In boat building, it may be used for all woods types lamination, coating, scarfing and strip planking. Thanks to its low viscosity and a wide range of hardeners (15 min to 10h44min), it allows applications in both traditional wet layup, vacuum bagging or under press. A thixotropic version, the 1020T is available for vertical or overhanging applications prone to dripping. The mixing ratio for all hardeners is 100:30 by weight. All hardeners...

Open the catalog to page 2

Mix : Neutral to yellow opalescent liquid 1023Sto1029S: Neutral to limpid liquid Visual aspect ! 1020 : Opalescent liquid Reactivity measurements realized with Rheotech® Indication on the choice of hardener according to ambient temperature conditions : • For the whole year, the use of 1026S hardener is recommended ; • For winter conditions, the use of 1028S is recommended ; • For summer conditions, the use of 1025S hardener is recommended. Datasheet V4 - 12.10.2021 / Previous version - 10.07.2018

Open the catalog to page 3

In order to obtain the maximum thermo-mechanical properties, it is necessary to respect the recommended curing cycle. The table below shows the glass transition temperatures (DSC) according to different curing cycles. Flexion properties on pure resin according to ISO 178 Datasheet V4 - 12.10.2021 / Previous version - 10.07.2018

Open the catalog to page 4

HEALTH & SAFETY - Plastic jerrycan kit of 1kg + 0.3kg - Plastic jerrycan kit of 5kg + 1.5kg - Plastic drum kit of 25kg + 7.5kg - Drum kit of 200kg + 2 x 30kg or 3 x 200kg + 180kg 1020T version is packaged in drums, stir before each use. Available on metal bucket of 10kg + 3kg TRANSPORT & STORAGE Skin contact must be avoided by wearing protective nitrile gloves & overalls or other protective clothing. Eye protection should be worn to avoid risk of resin, hardener, solvent or dust entering the eyes. If this occurs flush the eye with water for 15 minutes, holding the eyelid open, and seek medical...

Open the catalog to page 5

1020T

1020T

Catalog excerpts

All Resoltech catalogs and technical brochures