1020
5Pages

Hardeners 1023S to 1029S Multipurpose Epoxy Laminating System New hardeners CMR free - Adjustable pot life from 15mn to 10h44min - Good elongation characteristics - Wide choice of reactivities (6 miscible hardeners) - Little sensitivity to humidity during application - Available in thixotropic version (1020T) Datasheet V4 - 12.10.2021 / Previous version - 10.07.2018

RESOLTECH 1020 is a room temperature epoxy laminating system for wood-epoxy, concrete reinforcement and metal constructions that are inherently moving structures. In boat building, it may be used for all woods types lamination, coating, scarfing and strip planking. Thanks to its low viscosity and a wide range of hardeners (15 min to 10h44min), it allows applications in both traditional wet layup, vacuum bagging or under press. A thixotropic version, the 1020T is available for vertical or overhanging applications prone to dripping. The mixing ratio for all hardeners is 100:30 by weight. All...

Mix : Neutral to yellow opalescent liquid 1023Sto1029S: Neutral to limpid liquid Visual aspect ! 1020 : Opalescent liquid Reactivity measurements realized with Rheotech® Indication on the choice of hardener according to ambient temperature conditions : • For the whole year, the use of 1026S hardener is recommended ; • For winter conditions, the use of 1028S is recommended ; • For summer conditions, the use of 1025S hardener is recommended. Datasheet V4 - 12.10.2021 / Previous version - 10.07.2018

In order to obtain the maximum thermo-mechanical properties, it is necessary to respect the recommended curing cycle. The table below shows the glass transition temperatures (DSC) according to different curing cycles. Flexion properties on pure resin according to ISO 178 Datasheet V4 - 12.10.2021 / Previous version - 10.07.2018

HEALTH & SAFETY - Plastic jerrycan kit of 1kg + 0.3kg - Plastic jerrycan kit of 5kg + 1.5kg - Plastic drum kit of 25kg + 7.5kg - Drum kit of 200kg + 2 x 30kg or 3 x 200kg + 180kg 1020T version is packaged in drums, stir before each use. Available on metal bucket of 10kg + 3kg TRANSPORT & STORAGE Skin contact must be avoided by wearing protective nitrile gloves & overalls or other protective clothing. Eye protection should be worn to avoid risk of resin, hardener, solvent or dust entering the eyes. If this occurs flush the eye with water for 15 minutes, holding the eyelid open, and seek...