1010
5Pages

resoltech * resoltech 1010 Hardeners 1014 & 1016 Water based epoxy system - Mat or High gloss primer & varnish - 1/1 Easy mixing ratio in volume with 1014 - Uses water to clean brushes and rollers - Extreme low viscosity will prime any porous material in depth - May be applied on humid substrates Datasheet V4 - 21.12.2022 / Previous version - 04.11.2019

RESOLCOAT 1010 is a unique water based epoxy system. It may be used in a very large number of applications such as primer, varnish, veneer adhesive but also as matrix for self levelling compounds or mortars. Domains of application range from marine construction, furniture manufacturing, industrial & residential construction and fine arts. Apart from hydrophobic substrates, the 1010 system is compatible with most supports such as wood, concrete, plaster, stone, ceramic, metal..etc. It can be highly diluted in water so its viscosity drops extremely low, resulting in a prime choice material...

- For priming applications we recommend the following mixing ratio, 1 volume of resin for 1 volume of hardener 1014, then dilute with 1 volume of water. - Application with brush or roller. VARNISH AND TOPCOATS: - For high gloss applications we recommend the following then dilute with 1 volume of water. - For mat finish applications we recommend the following 1016, then dilute with 2 volumes of water. - L'application peut se faire au pinceau ou au rouleau. MORTARS AND SELF-LEVELLING COMPOUNDS: - Add 10 to 20% of mixed 1010-1014 to the substrate. - To fluidize the mix add only a few % of...

Datasheet V4 - 21.12.2022 / Previous version - 04.11.2019

1010/1014 : - Plastic bottles kit of 500g - Plastic jerrycans kit of 1, 2, 5, and 16kg - Plastic drums kit of 60kg - Drums kit of 400kg - IBCs kit of 1600kg 1010/1016 : - Plastic bottles kit of 625g - Plastic jerrycans kit of 2,5, 5, 12,5 and 40kg - Drums kit of 333kg TRANSPORT & STORAGE HEALTH & SAFETY Skin contact must be avoided by wearing protective nitrile gloves & overalls or other protective clothing. Eye protection should be worn to avoid risk of resin, hardener, solvent or dust entering the eyes. If this occurs flush the eye with water for 15 minutes, holding the eyelid open, and...