1010 ECO
5Pages

resoltech * resoltech 1010 ECO Hardeners 1014 - 1016 Biobased water based epoxy system - 32% biobased on resin part* - Mat or High gloss primer & varnish - 1/1 Easy mixing ratio in volume with 1014 - Uses water to clean brushes and rollers - Extreme low viscosity will prime any porous material in depth - May be applied on humid substrates *ratio of the number of biobased carbon atoms / the number of total carbon atoms

RESOLCOAT 1010 ECO is a unique water based epoxy system. It may be used in a very large number of applications such as primer, varnish, veneer adhesive but also as matrix for self levelling compounds or mortars. Domains of application range from marine construction, furniture manufacturing, industrial & residential construction and fine arts. Apart from hydrophobic substrates, the 1010 ECO system is compatible with most supports such as wood, concrete, plaster, stone, ceramic, metal, etc... It can be highly diluted in water so its viscosity drops extremely low, resulting in a prime choice...

APPLICATION - t is recommended to use the products at temperatures above 17°C in order to ease the water evaporation. I - Lower application temperatures (15°C minimum) are possible if a good ventilation is ensured. - case of low temperatures or very damp environments, it is recommended to make a small test before industrial In size application in order to check that evaporation of the water is possible. WARNING : Always mix the resin and the hardener before adding water. PRIMER: Never use the 1016 hardener in the first coat - or priming applications we recommend the following mixing ratio,...

Reactivity measurements realized on Rheotech®

HEALTH & SAFETY 1010 ECO / 1014 or 1010 ECO / 1016 : - Plastic jerrycan kit of 500g + hardener - Plastic jerrycans kit of 1, 2, 5, and 16kg + hardener - Plastic drums kit of 30kg + hardener TRANSPORT & STORAGE Keep containers sealed and away from heat and cold preferably between 10°C and 30°C in a well ventilated area. Our products are guaranteed in their original packaging (check expiry date on the label). Skin contact must be avoided by wearing protective nitrile gloves & overalls or other protective clothing. Eye protection should be worn to avoid risk of resin, hardener, solvent or dust...