AIRDACH
1 / 3Pages

AIRDACH AIRDACH is a ventiladed panel in EPS, self-extinguishable, “U” battened on the two shorter sides and “L” battened on the two longer sides. AIRDACH can be used for the inclined pitch covering of inhabited garrets: in fact, his ventilation channels, which ensure a ventilation volume of about 200 cm2 per metre (three channels perpendicular to the gutter’sline) and his insulation layer guarantee the respect of D. Lgs 311/06 concerning the energy saving. AIRDACH presents, fit in polystyrene, wood fillets that allow the fastening of seal fillets for clay tiles or tiles. This panel is combined with a transpiring sheat made up of four layers of protective film, strenghtened by a reticoular structure. Its laying is facilitated thanks to a self-adhesive band in butyl on the two sides in which the two sheath layers are superimposed. In this way the roof is also waterproofed (installation to be carried out at not less than 0 ° C). Every fillet of the panel AIRDACH is fixed on the covering, preferably inclinated, with two suitable mechanical fasteners (six mechanical fasteners each panel). CARACTERISTICS OF THE INSULATING EPS PANEL NORM REACTION TO FIRE: Euroclass THERMAL CONDUCTIVITY: λ [W/Mk] NORMAL RESISTANCE TO COMPRESSION [ Kpa ] 35011 Campodarsego (PD) - Via Antoniana, 108/A- Tel 0039 049 9202401 Fax 0039 049 5564468 www.re-pack.it email. info@re-pack.it

CARACTERISTICS OF THE TRANSPIRANT SHEAT PERMEABILITY TO STEAM DIFFUSION EQUIVALENT TO THE AIR LAYER NAIL TEAR RESISTANCE : LONGITUDINAL NAIL TEAR RESISTANCE: CROSS WATER RESISTANCE RESISTANCE TO TRACTION: LONGITUDINAL RESISTANCE TO TRACTION: CROSS * The test was carried out with the sheath tense or laid on support . ** The time refers to the water and traction resistance. The transpiring membrane does not replace the covering material , so it is recommended to adhere strictly to the time-table and continue with the laying of the covering as soon as possible. SIZE AND TRANSMISSION VALUES...

FOR WOODDEN ROOFS: SYSTEM OF LAYING AIRDACH PANEL WITH THE ADDICTION OF A WOOD LATH CM 10X3 To fix AIRDACH panel on the woodden roofs, Re.Pack recommends to install a wood lathe cm 10x13 on the roof in correspondence with the suitable space made on the EPS panel as you can see from the picture below. 35011 Campodarsego (PD) - Via Antoniana, 108/A- Tel 0039 049 9202401 Fax 0039 049 5564468 www.re-pack.it email. info@re-pack.it