Liquid waterproofing RENOLIT POLIQUID RENOLIT ALKORPLAN roofing products

RENOLIT POLIQUID liquid waterproofing RENOLIT POLIQUID is a two component, fast-curing, PMMA resin-based, polyester-fleece reinforced, liquid waterproofing system; especially created for waterproofing difficult roof details. LAYER STRUCTURE: 1. Surface 2. RENOLIT POLIQUID combi-primer* 3. First layer RENOLIT POLIQUID Detail 4. RENOLIT POLIQUID fleece 5. Second layer RENOLIT POLIQUID Detail ADVANTAGES EASY APPLICATION • Excellent adherence with the most common building materials • Short curing times (rainproof after 30 minutes) • Usable almost all year* • Suitable for installation up to high relative...

RENOLIT POLIQUID Application Universal application RENOLIT POLIQUID has a multitude of applications on flat roofs. The PMMA resin can be used in combination with the most current roof and building materials. In many cases the use of a primer is unnecessary. RENOLIT POLIQUID can be installed almost all year, taking into account the ambient temperature, material and surface, and the dew point (see technical data sheet and RENOLIT POLIQUID installation guide). Depending on the temperature of the substrate, more or less catalyst is added to the PMMA resin to allow a first rate homogeneous cure. In...

RENOLIT POLIQUID Product Information RENOLIT POLIQUID Detail (RENOLIT ALKORPLUS 81800-001) Material Application Consumption Shelf life Curing Colour Packing unit Product RENOLIT Poliquid Detail PMMA-resin Sealing of roof details, joins 2.5 kg/sqm, standard thickness 1.7 mm 12 months (+5°C to 30°C) 30 min rainproof, 3 hours complete curing Pebble grey (RAL 7032) 10 kg (container) The surface temperature should be at least 3°C above dew point during application and curing. Always activate with the RENOLIT POLIQUID catalyst TECHNICAL DATA RENOLIT POLIQUID 81800-001 ACCORDING TO ETAG 005 Water vapour...

Instructions for the application of RENOLIT POLIQUID Working material and accessories • RENOLIT POLIQUID Detail • RENOLIT POLIQUID catalyst • RENOLIT POLIQUID fleece • RENOLIT POLIQUID combi-primer • Standard RENOLIT ALKORPLUS81044 cleaner • Scissors, tape, sandpaper • Paint roller • Mixing bucket and stirrer • Protective measures (gloves, protective eyewear, ...) Mixing instruction Both RENOLIT POLIQUID and RENOLIT POLIQUID combiprimer have to be activated by means of the RENOLIT POLIQUID catalyst. 1. Thoroughly mix the product in the original can/drum. 2. Decide the amount of resin or primer...

Instructions for the application of RENOLIT POLIQUID Installation in six steps Ascertain the surface where the RENOLIT POLIQUID liquid waterproofing will be applied. Tape the edges of the area in order to achieve a neat finish of the roof detail. Cut the polyester RENOLIT POLIQUID fleece to size before activating the product. To obtain optimal adhesion of the RENOLIT POLIQUID product, it is important that the substrate is first roughened (abraded) and then cleaned using our standard RENOLIT ALKORPLUS81044 cleaner. When required apply the RENOLIT POLIQUID combi-primer. Activate the product according...

The RENOLIT POLIQUID liquid waterproofing is BBA certified. BRITISH BOARD OF AGREMENT ASSESSMENT OF PRODUCTS FOR CONSTRUCTION RENOLIT ALKORPLAN roofing products and system have a standard guarantee of 10 years, and are installed by approved contractors and installers who are trained and assessed by RENOLIT. The RENOLIT POLIQUID liquid waterproofing is part of the product/ system guarantee. The RENOLIT POLIQUID liquid waterproofing is ETAG 005 certified. ETA - 16/0391 www.renolit.com/roofing RENOLIT Cramlington Ltd, Station Road - Cramlington, Northumberland NE23 8AQ - United Kingdom T +44 1670...