RENOLIT DUALFIX
8Pages

{{requestButtons}}

Catalog excerpts

RENOLIT DUALFIX - 1

A universal adhesive for roofing RENOLIT DUALFIX RENOLIT ALKORPLAN roofing products

Open the catalog to page 1
RENOLIT DUALFIX - 2

RENOLIT ALKORPLUS81065: A universal adhesive for roofing RENOLIT ALKORPLUS81065-200 universal adhesive for single ply roofing is a one component moisture curing polyurethane glue especially created for the bonding of roofing membranes and flat roof insulation board. The RENOLIT ALKORPLUS81065-200 adhesive for roofing is applicable for both new build and refurbishment. Application • Bonding of fleece-backed synthetic roofing membrane to insulation or to the roof surface • Bonding of insulation to the roof surface • Bonding of insulation to insulation Advantages ECONOMICAL • Quick and easy to...

Open the catalog to page 2
RENOLIT DUALFIX - 3

Accessories Bonding insulation RENOLIT ALKORPLUS81065203 insulation dispensing kit Spray nozzle Dispensing hose + cable connector Packaging per 10 kits This nozzle makes it possible to dispense the glue with caterpillar-shaped beading on the insulation or on the surface to guarantee an excellent bond between the lower surface and the insulation plus the insulation to insulation. Bonding single ply membrane RENOLIT ALKORPLUS81065201 roofing membrane dispensing kit Spray gun Dispensing hose + cable connector Atomizing nozzle (25 pcs) This dispensing kit makes it possible to atomize the glue...

Open the catalog to page 3
RENOLIT DUALFIX - 4

RENOLIT DUALFIX: Applications New Build Bonding fleece-backed synthetic roofing membrane to insulation. Bonding insulation to the roof surface. (self-adhesive vapour control layer) Bonding fleece-backed synthetic roofing membrane to insulation. Bonding insulation to the roof build-up. (self-adhesive vapour control layer) Bonding fleece-backed synthetic roofing membrane to the existing bituminous roofing membrane (Existing roof surface)

Open the catalog to page 4
RENOLIT DUALFIX - 5

Considerations before use SECURITY Take protective measures before applying the adhesive as prescribed in the safety data sheet (gloves, protective eyewear, dust masks, work wear, work shoes, …) SHAKE To guarantee the optimal efficiency of the adhesive the canister should be shaken before use and before attaching the dispensing accessories. Hold the tank horizontally and shake vigorously for a minimum of one minute. CONNECTING For safety reasons and to avoid loss of adhesive all connectors and valves should be closed before connecting or disconnecting the dispensing accessories. During any...

Open the catalog to page 5
RENOLIT DUALFIX - 6

Bonding single ply roofing membrane 1 The surface should be clean of standing water, dust, grease and other contaminants. Rolls of roofing membrane may be laid out adjacent and rolled back in half or pulled back longitudinal, subsequent to positioning. The adhesive is atomized on the roof surface or insulation (consumption : between 100 and 160 g/m², depending on the surface) by means of a spray gun. The roofing membrane should be pressed or rolled onto the adhesive until sufficient initial curing/bonding has taken place. Sufficient curing/bonding of the adhesive takes place between 20 to...

Open the catalog to page 6
RENOLIT DUALFIX - 7

The surface should be clean of standing water, dust, grease and other contaminants. The distance between beads should be between 150 and 300 mm depending on wind load. (width of bead 20 to 25mm). The adhesive is dispensed by means of a spray nozzle. The insulation panels should be placed within 3 minutes after the dispensing of the adhesive, and should be pressed onto the adhesive until sufficient initial curing/bonding has taken place. A sufficient curing/bonding time of the adhesive takes approximately 20 to 45 minutes depending on humidity. The strands of adhesive are installed in a...

Open the catalog to page 7
RENOLIT DUALFIX - 8

The British Board of Agrément have assessed the life expectancy of RENOLIT ALKORPLAN F used in the United Kingdom to be up to 40 years. BRITISH BOARD OF AGREMENT ASSESSMENT OF PRODUCTS FOR CONSTRUCTION RENOLIT ALKORPLAN roofing products and system have a standard guarantee of 10 years, and are installed by approved contractors and installers who are trained and assessed by RENOLIT. All RENOLIT waterproofing membranes for roofing are part of the ROOFCOLLECT® collection and recycling programme. The RENOLIT Iberica S.A. factory in Barcelona is approved to ISO 9001/14001....

Open the catalog to page 8

All RENOLIT ALKORPLAN catalogs and technical brochures