REGUPOL VIBRATION 400
6Pages

— REGUPOL Forms of delivery, ex warehouse Rolls Thickness: 15 mm, dimpled Length: 10,000 mm, special lengths available Stripping/Plates On request: Die-cutting, water-jet cutting, self-adhesive versions possible Technical Details Maximum static load bearing capacity 0.100 N/mm* Rare, short term peak loads up to 0.150 N/mm2 Physical property Norm Static modulus of elasticity Based on EN 826 Dynamic modulus of elasticity Based on DIN 53513 Mechanical loss factor DIN 53513 Tensile strength Based on Result Comment 0.30 - 0.55 N/mm* Tangential modulus, see figure “Modulus of elasticity” 0.9 - 2.4 N/mm* Depending on frequency, load and thickness, see figure “dynamic stiffness” 0.17 Load-, amplitude- and frequency-dependent 2.1 % Measured 30 minutes after decompression with 50% deformation / 23 °C after 72 hrs 0.34 N/mm* Elongation at break Based on Tear resistance Fire behaviour Sliding friction Compression hardness Rebound elasticity Force reduction Ozone resistance DIN EN 13501 E acceptable fire behaviour Based on 180 kPa Compressive stress at 25 % deformation Based on 22 % dependent on thickness, test specimen h = 60 mm DIN EN ISO 17025 Cracking stage 0 Technical Data | REGUPOL vibration 400 | Release 06.04.2021 | www.regupol.com

Regupol vibration REGUPOL® vibration Load Ranges Maximum static load bearing capacity in N/mm² REGUPOL type designation Load Deflection Static load range Deflection [mm] Examination of deflection in accordance to DIN EN 826 between two stiff panels. Illustration based on the third loading. Velocity of loading and unloading 20 seconds. Tested at room temperature. Dimensions of test specimens 300 x 300 mm. Technical Data | REGUPOL vibration 400 | Release 06.04.2021 | www.regupol.com

Natural frequency [Hz] Illustration of the isolation efficiency of a single-degree-of-freedom system (SDOF system)on a rigid base with REGUPOLvibration 400. Parameter: powertransmission (insertion loss) in dB, isolation factor in %. Natural Frequency Natural frequency [Hz] Naturalfruenzncy of a single-engree-of-freedom nystem (SDOS system) considering the dynamic stiffness of REGUPOL vibration 400 onarigid base. Dimensious of test specimens 300 x300 mm. Technical Data | REGUPOL vibration 400 | Release 06.04.2021 | www.regupol.com

Change of mechanical loss factor [%] Change of dynamic stiffness [%] Amplitude [pm] Change of the dynamic stiffness due to changes in amplitudes. Average for 5 Hz, 10 Hz and 40 Hz excitation. Sinusoidal excitation at a constant mean load of 0.10 N/mm2 dimensions of the specimens 300 x 300 x 60 mm. Natural frequency of a single-degree-of-freedom system (SDOF system) on a rigid base. Amplitude [pm] Change of the mechanical loss factor due to changes in amplitudes. Sinusoidal excitation at a constant mean load of 0.10 N/mm!, dimensions of the specimens 300 x 300 x 60 mm. Technical Data |...

Pressure [N/mm²] Illustration of the dynamic modulus of elasticity for sinusoidal excitation at a constant mean load and an amplitude of ± 0.25 mm. Dimensions of specimens 300 x 300 x 45 mm; static modulus of elasticity as a result of the tangent modulus of the spring characteristic. Tested in accordance with DIN 53513. Dynamic Stiffness Pressure [N/mm²] Illustration of the dynamic stiffness for sinusoidal excitation at a constant mean load and an amplitude of ± 0.25 mm. Dimensions of specimens 300 x 300 x 45 mm; static stiffness as a result of the tangent m odulus of the spring...

Long-Term Creep Test Duration of load [h] Dimensions of specimens 300 x 300 x 60 mm Exclusion of Liability Technical services and offers based on these are subject to our General Terms and Conditions of sale, a copy of which can be found on our website www. berleburger.com. Special attention should be paid to paragraphs 4 and 5. In so far, please be advised as follows: Our expertise is the development and manufacturing of products. With our recommendation we can only assist you in selecting a product that is suitable for your demand. However, we cannot act as your architect or consulting...