REGUPOL VIBRATION 200
6Pages

— REGUPOL Forms of delivery, ex warehouse Rolls Thickness: 17 mm, dimpled Length: 10,000 mm, special lengths available Stripping/Plates On request: Die-cutting, self-adhesive versions possible Technical Details Maximum static load bearing capacity 0.020 N/mm2 Rare, short term peak loads up to 0.050 N/mm2 The material must be carefully and permanently profected against moisture during transport, storage, processing and use. Wet material may nof be used. Physical property Norm Static modulus of elasticity Based on EN 826 Result Comment 0.02 - 0.08 N/mm2 Tangential modulus, see figure “Modulus of elasticity” Mechanical loss factor DIN 53513 0.05 - 0.38 N/mm2 Depending on frequency, load and thickness, see figure “dynamic stiffness” 0.22 Load-, amplitude- and frequency-dependent 3.1 % Measured 30 minutes after decompression with 50% deformation / 23 °C after 72 hrs Tensile strength Based on Elongation at break Based on Tear resistance Based on DIN ISO 34-1 1.0 N/mm Sliding friction REGUPOL-laboratory 0.7 Compression hardness Based on 14 kPa DIN EN ISO 3386-2 Rebound elasticity Based on 14 % Normal flammability acceptable fire behaviour Steel (dry) Concrete (dry) Compressive stress at 25 % deformation test specimen h = 51 mm dependent on thickness, test specimen h = 51 mm dependent on thickness, test specimen h = 51 mm Technical Data | REGUPOL vibration 200 | Release 06.04.2021 | www.regupol.com

Regupol vibration REGUPOL® vibration Load Ranges Maximum static load bearing capacity in N/mm² REGUPOL type designation Load Deflection Static load range Deflection [mm] Examination of deflection in accordance to DIN EN 826 between two stiff panels. Illustration based on the third loading. Velocity of loading and unloading 20 seconds. Tested at room temperature. Dimensions of test specimens 300 x 300 mm. Technical Data | REGUPOL vibration 200 | Release 06.04.2021 | www.regupol.com

Vibration Isolation Natural frequency [Hz] Dargestellt of the isolation efficiencyeinen Ein-Massen-Schwinger auf starrem Untergrundon Illustration ist die Isolierwirkung für of a single-degree-of-freedom system (SDOF system) mit Regufoam® vibration 150 plus. Parameter: Kraftübertragungsmaß in dB, Isolierwirkungsgrad in %. a rigid base with REGUPOL vibration 200. Parameter: power transmission (insertion loss) in dB, isolation factor in %. Natural Frequency Natural frequency [Hz] Natural frequency of a für einen eindimensionalen Feder-Masse-Schwinger unter Berücksichtigung der...

Change of mechanical loss factor [%] Change of dynamic stiffness [%] Amplitude [pm] Change of the dynamic stiffness due to changes in amplitudes. Average for 5 Hz, 10 Hz and 40 Hz excitation. Sinusoidal excitation at a constant mean load of 0.011 N/mm2 dimensions of the specimens 300 x 300 x 51 mm. Natural frequency of a single-degree-of-freedom system (SDOF system) on a rigid base. Amplitude [pm] Change of the mechanical loss factor due to changes in amplitudes. Sinusoidal excitation at a constant mean load of 0.011 N/mm2, dimensions of the specimens 300 x 300 x 51 mm. Technical Data |...

Pressure [N/mm²] Illustration of the dynamic modulus of elasticity for sinusoidal excitation at a constant mean load and an amplitude of ± 0.25 mm. Dimensions of specimens 300 x 300 x 34 mm; static modulus of elasticity as a result of the tangent modulus of the spring characteristic. Tested in accordance with DIN 53513. Dynamic Stiffness Pressure [N/mm²] Illustration of the dynamic stiffness for sinusoidal excitation at a constant mean load and an amplitude of ± 0.25 mm. Dimensions of specimens 300 x 300 x 34 mm; static stiffness as a result of the tangent m odulus of the spring...

Long-Term Creep Test Duration of load [h] Dimensions of specimens 300 x 300 x 50 mm Exclusion of Liability Technical services and offers based on these are subject to our General Terms and Conditions of sale, a copy of which can be found on our website www. berleburger.com. Special attention should be paid to paragraphs 4 and 5. In so far, please be advised as follows: Our expertise is the development and manufacturing of products. With our recommendation we can only assist you in selecting a product that is suitable for your demand. However, we cannot act as your architect or consulting...