Estampados – Prints

Product catalog summary

Product Specifications
The document provides specifications for various fabric prints, including CANCÚN, ACAPULCO, TRIANA, JAMAICA, RIOJA, CALI, and AMAZONAS. Each print has different reverse widths ranging from 120 cm to 250 cm. The technical characteristics are average values with a tolerance of +/-5%.

Fabric Characteristics
The fabric is composed of 70% polyester fiber and 30% solution-dyed acrylic fiber. It is a resin-coated print on one side with a special 'Infinity Process' treatment for awnings, which repels water and dirt, creating an anti-stain and anti-mold barrier while allowing the fabric to breathe. The fabric is intended for outdoor use.

Advantages and Benefits

Textile look and feel
Printable fabrics
Easy maintenance
Energy and cost savings
Durability over time

Technical Characteristics

Weight: 375 g/m²
Thickness: 0.56 mm
Width: 120 / 220 / 250 cm depending on design
Standard roll length: 60 m
Water column: ≥ 400 mm
Tensile strength (warp/weft): 270/140 daN/5 cm
Tear strength (warp/weft): 7/4.5 daN/5 cm
Colour fastness to artificial light: 4-5 (Good-Excellent) Grey scale, 7-8 (Very good-Excellent) Blue scale
Colour fastness to artificial weathering: 4 (Good) Grey scale
Oil and water repellency: ≥ 4
Resistance to chemical agents: No change when exposed to window cleaning fluid, ammonia, alcohol, bleach

Safety, Health, and Environment
The document emphasizes the responsibility of the customer to ensure the correct use of the fabric and compliance with current regulations. S.A. RECASENS disclaims responsibility for assembly, installation, and non-compliance with regulations. The photographs and descriptions are for guidance only and have no contractual value. S.A. RECASENS reserves the right to make modifications.

Catalog excerpts

Open the catalog to page 1

Estampados – Prints Características del tejido | Fabric characteristics Composición | Composition 70% Fibra poliéster - 30% Fibra acrílica tintada en masa 70% Polyester fiber - 30% Solution-dyed acrylic fiber Tipo de tejido | Type of fabric Estampado resinado | Resin print Estampado a 1 cara y resinado por la cara revés. Tratamiento especial “Proceso Infinity” para toldos: repele el agua y la suciedad, generando una barrera anti-manchas y anti-moho y permitiendo transpirar al tejido. Resin coated one side. Special ”Infinity Process” treatment for awning: repels water and dirt, creating an anti-stain...

Open the catalog to page 2

Estampados – Prints

Estampados – Prints

Catalog excerpts

All Recasens catalogs and technical brochures