RF 50
22Pages

Racks and crossbars construction facade

Expert in the field of Aluminum More then 20 years of experience. Total production capacity of lines makes 25 000 tons of profiles per year. The factory is equipped by modern machines: Euroimpianti SRL , Pressezi Extrusion S.R.L. Horizontal line of the powder paining of the OEMME S.p.A., Trasmetal (Italy); Gema (made by Gema Switzerland GmbH ). Vertical Switzerland GmbH (Switzerland) and others. line of the powder painting (made by Trasmetal, Italy). 2 foundries by Cometal Engineering S.p.A. (Italy). Finished product packaging workshop, including a “warm” profile assembly line. 3 high speed...

Architectural systems Realit® Facade systems Window-doors systems Balcony systems Our team studies in detail the architectural features of each project and uses only functional and aesthetic solutions for decorating objects. Systems have high heat and soundproofing, air and water tightness. They are able to satisfy any individual wishes and take into account the architectural features of each project. Universal building envelopes elements are easy to adapt to the specific requirements of any project. They have optimum compatibility with others in facade construction forms. Office partitions...

Aluminium architectural systems Realit® © Алюминиевые архитекту

RF 50 Racks and crossbars construction facade The RF 50 system is designed for the manufacture of lightweight translucent wall coatings for buildings, office partitions and stainedglass windows of any category of complexity. It has a high bearing capacity. It allows you to design facades with the ability to install large-sized double-glazed windows, as well as form the refraction of the structure in plan and create external and internal corners. The system includes racks and crossbars with a visible width of 50 mm. The system is optimized for objects of any complexity thanks to a wide...

Realit® RF 50 series have a ventilation system in the area of the rebate of the glass unit and equalization of vapor pressure. Depending on the structure of the object and the loads acting on it, there is a large selection of racks with moments of inertia Ix from 4.92 to 3088.00 cm4, which make it possible to make dome structures and also create structures with a large pitch of racks. Crossbars of the 1st and 2nd levels can be connected to the rack, which ensures drainage even with complex facade structures. The assembly of the structure using the method of removing moisture "in the...

Quantity of racks and moment of inertia Competitor 1 19 racks in the system. Inertia moment lx from 2,09 to 1866,00 см4 Realit® architectural systems 24 racks in the system. Inertia moment lx from 4,92 to 3088,00 см4 Competitor 2 14 racks in the system. Inertia moment lx from 27,70 to 1240,00 см4 Competitor 3 14 racks in the system. Inertia moment lx from 40,94 to 858,00 см4 © Aluminium architectural systems Realit® In the facade series RF 50 there are 24 rack profiles. The inertia moment range lx is from 4.92 to 3088 cm4. This allows you to optimally select a profile based on the design...

Rack section Competitor 1 architectural systems Enlarged rack cavity i The presence of an enlarged cavity provides a guaranteed removal of moisture. © Aluminium architectural systems Realit®

Rack profile Competitor 2 Realit® architectural systems Presence of a rack of a special form © Aluminium architectural systems Realit® The rack of a special form leaves a "jar" untachedduring installation, which ensures tightness and eliminates moisture in the room.

Quantity of crossbars Competitor 1 14 crossbars 1st level in the system. Inertia moment: lx from 0,65 to 600,88 см4, ly from 4,95 to 61,13 см4 Realit® architectural systems Have 22 crossbars profiles Competitor 2 8 crossbars 1st level in the system. Inertia moment: lx from 8,25 to 411,95 см4, ly from 10,79 to 47,73см4 Competitor 3 12 crossbars 1st level in the system. Inertia moment: lx from 0,81 to 292,15 см4, ly from 3,43 to 39,30 см4 © Aluminium architectural systems Realit® In the facade RF 50 series there are 22 crossbar profiles. The range of inertia moment lx is from 0.5 to 476.37...

Quantity of crossbars 2d level Competitor 1 Realit® architectural systems 9 crossbars 2d level in the system. Inertia moment lx 35,24 - 238,64 см4 Have 13 crossbars profiles of the 2d level Competitor 2 6 crossbars 2d level in the system. Inertia moment (lx) 22,88 – 361,56 см4 i Competitor 3 Not available in the system © Aluminium architectural systems Realit® In the facade series RF 50 - 13 crossbars profiles of the second level. The range of inertia moment lx is from 25.95 to 301.07 cm4. This allows you to optimally select a profile based on the design features of the object and the loads...

Clamping strip to simulate the structural facade Competitor 1 Realit® architectural systems The protrusion of the clamping plate above the surface of the glass 5.8 mm Small protrusion of the clamping plate above the glass surface Competitor 2 The protrusion of the clamping plate above the surface of the glass 5 mm Competitor 3 Not available in the system © Aluminium architectural systems Realit® The clamping plate 38 mm wide protrudes only 3 mm above the surface of the glass, which makes it possible to produce a holistic and lightweight facade structure without visible transitions between...

Corner seals Realit® architectural systems Large choice of EPDM-corner seals Competitor 1 Not available in the system Competitor 2 Not available in the system Competitor 3 Not available in the system © Aluminium architectural systems Realit® EPDM corner seals are used to move from rack to crossbar seals, simplify installation of structures and provide optimal sealing of the entire facade.

Clamping strips for organizing the inner corner Realit® architectural systems There are 5 clamping strips with step 7,5° 3 size types with step 15° Competitor 2 3 size types with step 15° Competitor 3 3 size types with step 15° i The presence of five clamping strips in the RF 50 system allows for smoother transitions in the plane. © Aluminium architectural systems Real