CONKURE™
2Pages

CONKURE" Wet Curing Blanket - CONKURE80 For Hot Weather Concrete Curing ^ 'N Product Description Conkure™ Wet Curing Blanket consists of a highly absorbent synthetic needle punched fabric coated with a white reflective film. Unlike burlap, it will not rot or mildew. Conkure™ Blankets are lightweight and disposable making them an economical choice in concrete curing and yet are versatile and strong enough to be reused when cared for properly. Product Use Conkure™ Wet Curing Blanket is a reflective blanket specifically designed to be hydrated and inhibit moisture loss during the curing process of concrete. It will also significantly reduce heating of the concrete surface caused by the sunlight in hot weather conditions. The American Concrete Institute claims that moist curing is the best method for developing the strength of concrete and minimizes early drying shrinkage in their publication ACI 305R-99 (chapter 4.4.2) Conkure™ Wet Curing Blanket meets and exceeds AASHTO M-171 and ASTM C-171, "Standard Specification for Sheet Materials for Curing Concrete" for moisture retention and daylight reflection. Size & Packaging Conkure™ Wet Curing Blanket is rolled with the absorbent fabric side out onto a heavy duty cardboard core for ease of handling and installation. Conkure Blankets are available in a standard size of 9' X 250' rolls. Custom lengths are offered with minimum order requirements. Product Part # APPLICATIONS Flat Work Tunnels Pavement Building Construction Roads Decorative Concrete Columns Stained Concrete © 2015 RAVEN INDUSTRIES INC. All rights reserved.

CONKURE™ Wet Curing Blanket - CONKURE80 For Hot Weather Concrete Curing Thickness, Nominal Grab Tensile Strength Grab Tensile Elongation Trapezoid Tear Mullen Burst Elmendorf Tear Impact Resistance ASTM 94 * Light Reflectance E1347 % Per ASTM C171-05 ASTM E1347 Requires a reflectance of at least: Light Reflectance Requirement Per ASTM C171-05 70 % ASTM * Water Loss (WVTR) E96 2/24hrs 0.005 oz/ft 1.4 g/m2/24hrs Per ASTM C171-05 ater Loss (WVTR) Requirement more than: ASTM E96 Requires a water transmission rate of no W Per ASTM C171-05 10 g/m2 in 24 hrs *Testing was conducted by an...