SEAMING TAPES & OTHER ACCESSORIES FOR PLASTIC SHEETING From tie-down fasteners to field seaming tape, Raven Industries has the accessories you need to maximize your film's versatility and minimize installation time on the job. This white single-sided tape combines a heavy-duty, weather-resistant polyethylene backing with an aggressive rubber adhesive. VaporBond Tape offers excellent seaming capabilities for our materials with an "Easy Tear” feature to reduce installation time. TVB4 has a WVTR of 0.18 perms per ASTM D3833. Typical applications include vapor retarders, covers and liners. Available in 4” x 210' roll. R25B Tape is a single sided aggressive synthetic elastomeric adhesive that bonds instantly to properly prepared polyethylene and polypropylene. The black polymer backing and adhesive is specially formulated to provide years of performance even in direct sunlight. A poly release liner provides for ease of installation. Available in 4” x 100' roll. Butyl Seal Tape (TP2BR) VaporSeal™ Tape (TVSP4/TVSP12) VaporSeal™ Tape is a patented single-sided 7-layer gas barrier tape with a release liner for ease of installation. The backing contains a layer of highly impermeable EVOH designed to block migration of radon, methane and VOC's. An aggressive acrylic adhesive provides outstanding adhesion to polyethylene over a wide temperature range. Typical uses include joining, repairing and sealing gas/moisture barriers. Available in 4” x 160' and 12” x 50' rolls. Butyl seal is a double-sided reinforced aggressive black butyl rubber tape used to join panels of polyethylene and polypropylene together by overlapping the edges and applying Butyl Seal in between. It is also used to adhere to concrete walls and footings when properly prepared. Butyl Seal is non-hardening and flexible. Available in 2” x 50' roll. VaporBoot Tape is a single-sided elastomeric butyl tape used to complete pipe boot installations (sealing the boot to the pipe). The 100% stretchable Butyl adhesive features excellent adhesion values and 3-D stretching that can be easily molded to multiple surfaces without any creases and folds. Available in 2” x 16.4' roll. POUR-N-SEAL™ is a gray two part epoxy used to seal around multi-pipe penetrations in areas where pipe boots are not practical, when installing VaporBlock or Absolute Barrier. The POUR-N-SeAl system includes 25 lineal feet of a 1" adhesive-backed foam to form a dam around multi-pipe penetrations to contain POUR-N-SEAL™ during the setting process. VaporBoot\VaporBoot G System (VBOOT\VBOOTG) The VaporBoot System is designed to assist in securing pipe and other penetrations that run vertically through the vapor retarder material. The VaporBoot System offers a quick solution and is delivered to the jobsite in a complete package. VaporBoots are produced from high performance VaporBlock® and VaporBlock® G™ material. Package Contents: 25 - VaporBoots (18" x 18", w/precut center marker) 1 - roll of VaporBoot Tape VaporBoot Plus Preformed Pipe Boots (VBPBT) VaporBoot Plus Preformed Pipe Boots are produced from heavy 40 mil co-extruded polyethylene and barrier resins for excellent strength and durability. The preformed boots are stepped to fit 1” to 4” wide pipe penetrations. VaporBoot Plus Preformed Pipe Boots are available in quantities of 12 per box. © 2015 RAVEN INDUSTRIES INC. All rights res

SEAMING TAPES & OTHER ACCESSORIES FOR PLASTIC SHEETING Dura^Skrim® Reinforced Sandbags Dura^Skrim reinforced sandbags are used to secure large covers and liners to prevent wind damage. Stock bags are produced with strong Dura^Skrim 8 & 12 mil reinforced polyethylene. These 15” wide x 24” long bags are designed to hold 35 lbs. Sandbags are also available in other Raven reinforced materials with minimum order requirements. 11.8” Cable Ties are also available. These full size clips are 11” long and fit most commercial scaffolding. Dura-Clips will securely fasten your poly sheeting to scaffolding,...