Technical Specifications Summary

Nominal Thermal Output (Min/Max): 3.5 - 12.5 kW
Pellet Fuel Consumption (Min/Max): 0.66 - 2.6 kg/h
Efficiency: Greater than 86%
Flue Exit Pipe Diameter: 80 mm
Tank Capacity: 20 kg
Burn Time (Min/Max): 7.1 - 30.3 hours
Installed Power: 110 W
Net Weight: 155 kg

Summary:
This document provides key technical parameters for a pellet heating appliance. The device operates within a nominal thermal output range of 3.5 to 12.5 kW, consuming between 0.66 and 2.6 kg of pellet fuel per hour. It achieves an efficiency exceeding 86%, indicating high energy conversion performance. The flue exit pipe diameter is specified at 80 mm, which is critical for proper exhaust gas evacuation.

The pellet tank capacity is 20 kg, allowing for a burn time ranging from approximately 7 to 30 hours depending on operating conditions. The installed electrical power required for operation is 110 W, and the unit has a net weight of 155 kg.

Key Parameters and Their Importance:

• Thermal Output: Defines the heating capacity and suitability for different space sizes.
• Fuel Consumption: Indicates operational cost and fuel efficiency.
• Efficiency: Reflects energy utilization and environmental impact.
• Flue Pipe Diameter: Ensures safe and effective exhaust management.
• Tank Capacity and Burn Time: Affect user convenience and refueling frequency.
• Installed Power: Important for electrical supply planning.
• Net Weight: Relevant for installation and handling considerations.