Technical Specifications Summary

Nominal Thermal Output (Min/Max): 2.8 - 10.0 kW
Pellet Fuel Consumption (Min/Max): 0.6 - 2.2 kg/h (according to DIN 18 891 standard)
Efficiency: Greater than 87%
Flue Exit Pipe Diameter: 80 mm
Tank Capacity: 15 kg
Burn Time (Min/Max): 6.3 - 25.0 hours
Installed Power: 110 W
Net Weight: 134 kg

Summary: This document provides key performance and physical parameters for a pellet stove or heating appliance. The device operates within a nominal thermal output range of 2.8 to 10.0 kW, consuming between 0.6 and 2.2 kg of pellets per hour. It achieves an efficiency exceeding 87%, indicating high energy conversion effectiveness. The flue exit pipe diameter is standardized at 80 mm, facilitating proper exhaust. The pellet tank holds up to 15 kg, allowing for a burn time ranging from approximately 6 to 25 hours depending on consumption rate. The installed electrical power required for operation is 110 W, and the unit weighs 134 kg.

Critical Parameters and Recommendations:

• Ensure pellet consumption rates align with the specified min/max to optimize efficiency and burn time.
• Maintain the flue pipe diameter at 80 mm to ensure safe and effective exhaust flow.
• Monitor tank capacity to avoid interruptions in operation.
• Consider the installed power requirement (110 W) for electrical supply planning.
• Weight considerations (134 kg) are important for installation and handling.