Exhibit with us
*myarchiexpo  
English
  1. Catalogs
  2. Randers Tegl A/S
  3. RT162_ULT_468x108x38_Waterstruck_en
video corpo

RT162_ULT_468x108x38_Waterstruck_en

RT162_ULT_468x108x38_Waterstruck_en
1 / 1 PageView full catalog

RT162_ULT_468x108x38_Waterstruck_en

Product catalog summary
Product Overview: The RT162 ULTIMA SOFT-MOULDED brick, identified by article number 3 162 01 00, is designed for use in unprotected masonry. It falls under Brick type/Category U/1.
Specifications:
  • Geometry: G1, compliant with EN1996-1-1, with a hole percentage under 25.
  • Dimensions: Length 468 mm, Width 108 mm, Height 38 mm.
  • Tolerances: Length ±9 mm, Width ±4 mm, Height ±2 mm.
  • Range: Length 10 mm, Width 5 mm, Height 4 mm.
  • Gross Density: 1800 kg/m3 with a tolerance of D1 ±10%.
  • Compressive Strength: Average minimum 60 N/mm2, normalized minimum 45 N/mm2.
  • Water Absorption: Maximum 12% by weight.
  • Durability: Freeze/thaw resistant, category F2.
  • Fire Resistance: Category A1, contains less than 1.0% organic material.
Supplemental Information:
  • Initial Rate of Absorption: 0.5 ± 0.5 kg/m2.
  • Exposure Class: MX3.2, MX4.
  • Bond Strength: 0.15 N/mm2, as per EN 998-2, annex C.
  • Bricks per m2: 42 pieces with a 12 mm mortar joint.
  • Palletising: 50 pieces per pallet.
  • Cleaning: Acid-cleaning is prohibited; refer to cleaning instructions at randerstegl.com.
  • Mortar Selection: Based on strength and durability characteristics, considering static impacts and exposure class.
  • Note: As a natural material, variations in color and structure may occur. Samples or reference buildings should be consulted.
Contact Information: Randers Tegl A/S, Mineralvej 4, DK-9220 Aalborg, Phone: 98 12 28 44, Email: [email protected], Website: www.randerstegl.dk
Revision Date: 27/05/2020
See more

Catalog excerpts

RT162_ULT_468x108x38_Waterstruck_en-1

DETAILS FROM DOP Brick type / Category Bricks for use in unprotected masonry In accordance with EN1996-1-1 holepercentage under 25 Gross density Compressive strength, average, min Compressive strength, normalized, min Water absorption, maximum Durability against freeze/thaw Freeze/thaw resistant Active soluble salts content (Category) Fire resistance contains < 1,0% organic material Initial rate of absorption, average value±tolerance Exposure class Bond strength N/mm 2, table value, EN 998-2, annex C Bricks per m2 with a 12mm mortar joint Acid-cleaning is not allowed. See instructions for cleaning of masonry at randerstegl.com Mortar selection The type of mortar is chosen on the basis of characteristics of strength and durability in accordance with static impacts and exposureclass. Brick is a natural material and variations can thus occur in terms of colour and structure. Therefore please see samples or reference buildings with the brick products in question. SUPPLEMENTAL INFORMATION HAMMERSHØJ TEGLVÆRK TINDBÆKVEJ 16 8830 TJELE Revised 27/05/2020 Randers Tegl A/S Mineralvej 4 DK-9220 Aalborg

 Open the catalog to page 1

All Randers Tegl A/S catalogs and technical brochures

  1. RT165 ULTIMA WATERSTRUCK
    RT165 ULTIMA WATERSTRUCK

    1  Page

  2. RT156 ULTIMA WATERSTRUCK
    RT156 ULTIMA WATERSTRUCK

    1  Page

  3. RT160
    RT160

    1  Page

  4. RT159
    RT159

    1  Page

  5. RT153
    RT153

    1  Page

  6. RT151
    RT151

    1  Page

  7. RT150
    RT150

    1  Page

  8. RT161_ULT_468x108x38_Waterstruck_en
    RT161_ULT_468x108x38_Waterstruck_en

    1  Page

  9. RT154_ULT_468x108x38_Waterstruck_en
    RT154_ULT_468x108x38_Waterstruck_en

    1  Page

  10. RT153 ULTIMA SOFT-MOULDED
    RT153 ULTIMA SOFT-MOULDED

    1  Page

  11. RT 151
    RT 151

    1  Page

  12. RT 150 ULTIMA
    RT 150 ULTIMA

    1  Page

  13. Ultima - Linear Bricks
    Ultima - Linear Bricks

    63  Pages

  14. Lookbook
    Lookbook

    75  Pages

  15. Roof tiles
    Roof tiles

    92  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.