RT156 ULTIMA WATERSTRUCK - Randers Tegl A/S - PDF Catalogs | Documentation

Catalog excerpts

DETAILS FROM DOP Brick type / Category Bricks for use in unprotected masonry In accordance with EN1996-1-1 holepercentage under 25 Gross density Compressive strength, average, min Compressive strength, normalized, min Water absorption, maximum Durability against freeze/thaw Freeze/thaw resistant Active soluble salts content (Category) Fire resistance contains < 1,0% organic material Initial rate of absorption, average value±tolerance Exposure class Bond strength N/mm 2, table value, EN 998-2, annex C Bricks per m2 with a 12mm mortar joint Acid-cleaning is not allowed. See instructions for cleaning of masonry at randerstegl.com Mortar selection The type of mortar is chosen on the basis of characteristics of strength and durability in accordance with static impacts and exposureclass. Brick is a natural material and variations can thus occur in terms of colour and structure. Therefore please see samples or reference buildings with the brick products in question. SUPPLEMENTAL INFORMATION HAMMERSHØJ TEGLVÆRK TINDBÆKVEJ 16 8830 TJELE Revised 11/11/2022 Randers Tegl A/S Mineralvej 4 DK-9220 Aalborg

Open the catalog to page 1

All Randers Tegl A/S catalogs and technical brochures