Ono Meeting X table Design: Hans Thyge Description The ONO table series is based on a column principle. Gone are the traditional four table legs. Instead there is a central column with branching feet giving the necessary robustness and support on both ONO Break and ONO Meeting. In addition to a light and simple design the columns also ample legroom underneath the table ONO Meeting X 360*120/150/120 cm ONO Meeting X 500*120/150/120 cm ONO Meeting X 640*120/150/120 cm ONO Meeting X 780*120/150/120 cm Technical specifications Table tops: Made of 19 mm MDF-chipboard with solid chamfered edge. Veneer: beech or maple Laminate: Formica, surface VEL, thickness 0,7 mm. Linoleum: Forbo Desktop Frame: Single column: Column in dia. 60*1,5mm steel tube ramified with a joint made of hand polished pressure diecasted aluminium into 2 feet in dea. 31,7*2 mm steel tubes mounted with adjusting screws in hand polished aluminium (dia. 80 mm). Double column: Columns in dia. 60*1,5 mm steel tube DIN2394 ramified with 2 joints made of hand polished pressure diecasted aluminium, connected with a V-shaped dia. 31,7*2 mm steel tube, into 2 feet in dia. 31,7*2 mm steel tubes DIN 2394 mounted with adjusting screws in hand polished aluminium (dia. 80 mm). Columns: available in 10 colours, chrome and satin chrome Feet: chrome or satin chrome Adjusting screw: Polished aluminium (ø80 mm) Randers + Radius + Tolsagervej 9 + DK-8300 Hadsten + Phone.: +45 70 30 05 15 + Fax: +45 87 61 34 01 + [email protected]

Table tops Beech veneer Maple veneer Black Linoleum Desktop Forbo Saturn yellow Orange White Black Dark grey Alu metalic metalic lacq., 7509 lacq Light grey laminate Black laminate Red Olive Cobalt blue Chrome Satin chrome Randers + Radius + Tolsagervej 9 + DK-8300 Hadsten + Phone.: +45 70 30 05 15 + Fax: +45 87 61 34 01 + [email protected]