Catalogs >
RANDELL >
COUNTERTOP RAIL MODEL CR9000

COUNTERTOP RAIL MODEL CR9000
2Pages

Catalog excerpts

PROJECT NAME: LOCATION: PREPARATION TABLE COUNTERTOP RAIL MODEL CR9000 The CR9000 Series takes the best of condiment cooling designs from our 8000 Series Preparation Table and makes them available in a counter top design. These counter top rails offer the option of converting existing work surfaces into pan holding operations in compliance with the NSF/ANSI standard 7, 41˚ F. pan product temperatures. Our rail design is proven by over 12 years of wrapped coldwall construction experience. ITEM NO: QTY: MODEL NO: AIA NO: SIS NO: CSI SECTION: 11400 AVAILABLE MODELS: ELECTRICAL: Units will be provided with a 8’ STANDARD FEATURES: This equipment is intended for use in rooms having an ambient temperature of 86˚F (30˚C) or less. • Meets 1998 NSF Standard 7 41˚ F Product Temperature Requirements • Recessed Wrapped Coldwall Rail with Exclusive Temperature Control power cord and 3-wire grounded plug as standard, pre wired for 115 volt, 60 hertz, single phase operation. Export voltages are available and require hard wiring in the field to the units main junction box. CR9000 Countertop Rail Prep Tables, Model CR9060 with optional hood shown. ORIGIN OF MANUFACTURE: Designed and manufactured in the United States. UNIT CONSTRUCTION: Exterior front, sides and top are constructed of 18 gauge stainless steel. The raised refrigerated rail will be mechanically cooled and shall be provided with one opening to allow flexible pan configurations. The interior of the rail will be one piece stainless steel with coved corners for easy wipe out. Rail will hold standard 6” deep pans - supplied by others. Unit bottom is galvanized metal. A mechanical housing is mounted on the end with a stainless steel removable air flow cover. REFRIGERATION SYSTEM: Designed with OPTIONS/ACCESSORIES: Exclusive Hood & Cover Assembly R-134A refrigerant, this coldwall constructed unit is provided with a self-contained refrigeration system. A exterior mounted on/off switch is provided as standard to allow the rail to be shut off for defrosting and non-use times. Prep Tables PPSPEC00013 RevB

Open the catalog to page 1

NOTE: Unit must set away from rear or right side wall 4". 'Height listed is to top of open lid assembly. Height to top of the rail at rear is 12.09". unified brands- 1055 Mendell Davis Drive, Jackson, MS 39272,888-994-7636, unifiedbrands.net © 2013 Unified Brands. All Rights Reserved. Unified Brands is a wholly-owned subsidiary of Dove

Open the catalog to page 2