wcm-020
2Pages

JV Wired data sheet WCM-020 2 BUTTON WIRED PUSH BUTTON MODULE WHAT IS IT? A hard wired 2 button push button control module that has several fixing options. The WCM-020 connects to the Rakom wired CAT5 network pre configured for scene 1 and off Based upon the widely used 50x50mm Euro Module switch plate accessory standard. Rako flat plate and screwless switch plate kits are available in a selection of finishes including: White Brushed Stainless Steel * Mirrored Stainless Steel Polished Brass Black Nickel ULTIMATE CONTROL The WCM-020 push button control module comes pre-configured for selecting scene 1 and off. Each button is complete with a blue LED indicator and day-night etched buttons. Easy connection to the Rakom CAT5 wired network is by a removable 8 way punch down module that can be installed at first fix stage prior to the push button front control module. This protects the control module from being damaged while building works are being finished. The module is suitable for installation in any of the standard Rako fixing solutions and is also suitable for all switch accessory plates that use a 50x50mm grid and cover plate arrangement. * As shown opposite the WCM020 module complete with WLF020-SS screwless cover plate kit fitted.

/If Wired data sheet WCM-020 2 BUTTON WIRED PUSH BUTTON MODULE technical data mechanical data input supply 12-18vdc supply from Rakom CAT5 wired network fixing Flush mounting into standard single gang back box, minimum 35mm depth. 50g climate range Temperature +2C to +40C cable type UTP CAT5e or CAT6 terminal type 8 way Krone punch down (screw terminal option available) Two part plug & socket module allowing system wiring before decoration. 2 x Krone connectors for Rakom data termination. (CAT 5 cable) communication Rakom wired network memory Flash memory (non volatile)...