(« 0) Wireless data sheet RCM020 2 BUTTON RF PUSH BUTTON MODULE WHAT IS IT? A wireless 2 button, push button control module that has several fixing options. Lithium battery powered so can be mounted anywhere without having to run cabling. The unit provides full scene programming. Based upon the widely used 50x50mm Euro Module switch plate accessory standard. Rako flat plate and screwless switch plate kits are available in a selection of finishes including: Brushed Stainless Steel Mirrored Stainless Steel Polished Brass White Metal Black Nickel* White Plastic * As shown opposite the RCM020 module complete with RLF020-BN cover plate kit fitted. The RCM020 wireless push button wall plate controller pre configured for scene 1 and off WIRE-FREE CONTROL The RCM020 push button control module comes pre-configured for scene 1 and off. The wall plate controllers are designed to be mounted anywhere, be it flush mounting to UK back-boxes or simply surface mounted to any flat surface using the pattress provided**. It is also suitable for all switch accessory plates that use a 50x50mm grid and cover plate arrangement. Rakom coded radio transmission eliminates the need for any data or power cabling ensuring that the system can be installed with minimum fuss and disruption. ** Surface mounting is only suitable for screwfixing flat plates and NOT screwless plate options.

(«») Wireless data sheet RCM020 2 BUTTON RF PUSH BUTTON MODULE technical data mechanical data dimensions 50x50x12mm - flush mount fixing Flush mounting into standard UK single gang back box, minimum 12mm deep. Surface mounting on standard single gang UK or European back box or direct to flat surface. input supply 6V DC - 2x 3V Lithium coin cell CR2016 (remote power supply version available) battery Life Greater than 3 years climate range Temperature +2C to +40C communication Rakom coded fm radio, 433.9MHz Flash memory (non volatile) WE RESERVE THE RIGHT TO CHANGE THE SPECIFICATION...