RAKO SYSTEM

RAKO SYSTEM
1 / 31 PagesView full catalog

RAKO SYSTEM

Product catalog summary
Introduction
RAKO SYSTEM offers a comprehensive range of products for under tile and surfacing needs, including adhesives, penetration, waterproofing, corrective, leveling, jointing, and cleaning products. Their mission is to support both residential and commercial projects with advanced materials and technical guidance.
Penetration and Contact Materials
RAKO provides primers and coatings to enhance bonding and surface preparation. Key products include PE 201 for absorbent surfaces, CP 203 for non-absorbent bases, and PE 204 for smooth surfaces. EM 10 is a liquid additive for cement products, and EPA 1 is an epoxy penetration coating for fresh concrete.
Corrective Materials
These materials are designed for quick repairs and reinforcement, including MO 35 QUICK for high-strength repairs, MO AC for steel reinforcement, and MO 50 for replacing corroded concrete.
Levelling Materials
RAKO offers leveling compounds such as OV 30/OV 40 for high-strength applications and LE 30/LE 40 DINO for fast-setting self-leveling on horizontal substrates.
Waterproofing Materials
RAKO's waterproofing solutions include SE 1 for bathrooms and kitchens, SE MACH3 for high water pressure environments, and SE 6 for flexible waterproofing in high water pressure areas.
Adhesives
RAKO provides a variety of adhesives, including AD 520 for frost resistance, AD 530 for high water pressure areas, and AD 570 for hyper flexibility. Each adhesive has specific applications and limitations.
Grouting Materials
Grouting options include GF DRY for flexible, water-repellent grout, GW for wide joints, and GE EPOXY for waterproof and chemical-resistant applications.
Additional Products
RAKO also offers products like SAB polyurethane sealant for flexible joints, PES polyethylene separators, and various cleaning agents for maintenance.
System Solutions
RAKO provides detailed instructions for the installation and insulation of ceramic tiles on balconies, pools, and bathrooms, emphasizing the importance of proper material selection and application techniques.
Specifications and Procedures
The document outlines specifications for jointing materials, adhesives, and sealants, along with detailed procedures for installation and maintenance to ensure durability and performance.
Standards and Recommendations
Emphasizes the importance of using appropriate materials and techniques, with recommendations for cleaning and maintenance to ensure the longevity of tiling systems.
Key Data and Measurements
Includes acoustic data for sound insulation systems and specifies thickness and application rates for various materials to comply with industry standards.
Critical Information
Highlights the importance of using PES polyethylene separators to prevent undesired adhesion and ensure the correct shape of silicone fillers, along with the need for proper base preparation.
See more

Catalog excerpts

RAKO SYSTEM-1

Penetration and contact materials Corrective materials Levelling materials Waterproofing materials Adhesives Grout Silicones Cleaning agents Additional goods System solutions References

 Open the catalog to page 1
RAKO SYSTEM-2

RAKO SYSTEM building chemistry extends its services for under tile and surfacing solutions supplying adhesive, penetration, under tile water-proofing, corrective, leveling, jointing and cleaning products. Its mission statement is to provide residential and commercial projects with the latest developments in the industry together with the technical support required to fit a full system solution with relation to materials, methods of application, processing and finally on site guidelines. RAKO SYSTEM has a full dedicated research and development team specialized in under tile and surfacing solutions...

 Open the catalog to page 2
RAKO SYSTEM-3

PENETRATION AND CONTACT MATERIALS PENETRATION AND CONTACT MATERIALS USAGE (appr.) PACKAGING pcs/pallet(kg) DEEP PENETRATION PRIMER PE 201 - DEEP STRENGTHENING PENETRATION COATING INTENDED USE: Deep strengthening primer intended in a prescribed concentration for penetration of less solid absorbent surfaces and base structures. PE 201 is applied before cement screeds, water proofing or other cement based materials in both internal and external environments. Coating with PE 201 reduces absorption, reinforces the surface of the base, and improves flowing properties most importantly increasing the...

 Open the catalog to page 3
RAKO SYSTEM-4

SYSTEM CORRECTIVE MATERIALS CORRECTIVE MATERIALS MO 35 QUICK - QUICK SETTING CORRECTIVE MATERIAL INTENDED USE: Design mortar with hydraulic fitters, minerals and additives used for immediate high strength reparation on all concrete base structures. It is also suitable for high strength fixations and anchoring of elements. Other important information: • Shetf life: 6 months - If stored in a dry place • Pot life: 15-20 minutes depending on weather • Traffic ability: After 1 hour • Compressive strength: min. 35 MPa • Recommended thickness per layer: 2 - 30 mm MO AC - ANTICORROSIVE POLYMER...

 Open the catalog to page 4
RAKO SYSTEM-5

LEVELLING COMPOUNDS OV 30 - CEMENTITIOUS SCREED INTENDED USE: Special cement screeds with fibers used for high strength, resistant and variable layer thickness in internal and external environments. For example: pools, balconies, terraces, public showers etc. It can be used as final walking layer. OV 30 Other important information: • Shelf life: • Pot life: • Traffic abilit y: • Floor tiling: • Compressive strength: • Granularity: • Recommended thickness per layer: 12 months - If stored in a dry place 1 hour depending on weather Walking after 3 days min. after 14 days min. 30 MPa 0 - 4 mm 5 -...

 Open the catalog to page 5
RAKO SYSTEM-6

LEVELLING COMPOUNDS LEVELLING COMPOUNDS LE 10 MARKING USAGE (appr.) LE 10 BC5 155 25 07 J0V 1.70 kg/m2/1 mm PACKAGING pcs/pallet (kg) 25/ 1 200 LEVELLING SCREED| |< LE 10 - LEVELLING COMPOUND FOR LAYERS BETWEEN 1 - 10 MM INTENDED USE: Thixotropic leveling compound used for horizontal (floor and ceiling) and vertical substrates before laying tiles or other floor coverings. It can be applied to concrete or other tiles using the prescribed primer. It can be applied in a single layer between 1 - 10 mm and in local unevenness up to 15 mm thickness in one working step. LE 10 is not intended...

 Open the catalog to page 6
RAKO SYSTEM-7

WATERPROOFING MATERIALS BCN I03 24 ZE J0V light green B 1.20-1.60 kg/m2/2 layers SE 1 - HIGHLY ELASTIC FLUID SEALING FILM FOR DIRECT WATERPROOFING INTENDED USE: Waterproofing with easy processing intended for wet areas in internal usage (e.g. bathrooms, showers, kitchens...). It is to be applied horizontally and vertically on cement plaster, concrete, plasterboards... SE 1 creates a substrate for bonding ceramics, natural and engineered stones. For spaces with increased moisture, the floor should be sloped towards a drainer avoiding any possible water retention between the waterproofing and the...

 Open the catalog to page 7
RAKO SYSTEM-8

WATERPROOFING MATERIALS width 80 mm, length 10 m width 100 mm, length 10 m width 120 mm, length 10 m width 150 mm, length 10 m width 1000 mm, length 10 m width 80 mm, length 50 m width 100 mm, length 50 m width 120 mm, length 50 m width 150 mm, length 50 m internal corner external corner packing flange 430/430 mm SYSTEM ADHESIVES SE 5 - WATERPROOF ELASTIC SEALING STRIPS INTENDED USE: Double sided waterproof sealing strips intended for bridging and seating of dilatation joints, pipe passages and connections between floors, watts and corners. SE 5 can be used for tow or high water pressure in internal and...

 Open the catalog to page 8
RAKO SYSTEM-9

ADHESIVE FOR WALL TILES – STANDARD INTENDED USE: Standard adhesive intended for gluing highly absorbent ceramic or natural stone (not engineered stones) horizontally and vertically in internal environments. AD 501 can be used in wet areas such as bathrooms and kitchens. It cannot be used in areas under thermal stress such as floor heating nor areas with heavy loads such as cars or traversing forklifts for example. Furthermore, it is not intended for high water pressure areas such as water tanks or pools. Other important information: •  •  •  •  •  •  •  Shelf life: 12 months – If stored in a...

 Open the catalog to page 9
RAKO SYSTEM-10

AD 530 MAX – AFLEXIBLE ADHESIVE, TYPE C2TES1, FOR GLUING OF LARGE-FORMAT WALL TILES AND FLOOR TILES, WITH A HIGH VALUE OF ADHESION AND LATERAL DEFORMATION, SUITABLE FOR GLUING IN INTERNAL AND EXTERNAL ENVIRONMENTS FLEXIBLE ADHESIVE FOR LARGE-FORMAT CERAMICS INTENDED USE: A flexible adhesive for gluing of large-format floor tiles and wall tiles (30 x 60 cm, ≥ 60 x 60 cm). The new formula shows a high value of adhesion and lateral deformation, extended withering time, and reduced slip. Improved properties show simple workability, curing without stress (stability), and guaranteed resistance to efflorescence....

 Open the catalog to page 10
RAKO SYSTEM-11

QUICK- HYPERFLEXIBLE ADHESIVE AD 600 - ADHESIVE CLASS C2FTS2 INTENDED USE: Fast setting, frost resistant, hyper-flexible and highly improved adhesive intended for gluing aft types of ceramic, natural stone and specifically engineered stones horizontally and vertically in internal and external environments. AD 600 can be used in wet areas such as bathrooms and kitchens in addition to areas under thermal stress such as floor heating. It is also suitable for high water pressure areas such as water tanks or poofs and areas with heavy toads such as cars or traversing forklifts for example. Other important...

 Open the catalog to page 11

All RAKO CERAMICS catalogs and technical brochures

  1. POOL 2018

    34  Pages

  2. POOL 2014

    31  Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.