Created: 02/12/2013 WP4FCH320PSQ Fully shielded. Full Cutoff Wallpack. Full Cutoff optics for 400 watt HPS or 320 - 400 watt MH. Full Cutoff optics with flat tempered glass lens. Cap/Ignitor cradle and EZ mount knock-outs for easy wiring. Lamp supplied. Lamp Info Type: Watts: Shape/Size: Base: ANSI: Hours: Lamp Lumens: Efficacy: Color: Bronze Weight: 28.5 lbs Ballast Info ED28 320W N/A N/A N/A 20,000 31,000 84 LPW Type: 120V: 208V: 240V: 277V: Input Watts: Efficiency: CWA HPF QT 2.6/3.2 1.5/1.8 1.3/1.6 1.2/1.4 368W 87% Technical Specifications UL Listing: Suitable for wet locations. HID fixtures can be wired with 90°C supply wiring if supply wires are routed 3" away from the ballast. Housing: Die cast aluminum 1/2" NPS tapped holes top, both sides and back for conduit or photocontrol. Hinged refractor frame, Continuous silicone rubber gasket. Reflector: Specular anodized aluminum, removable for installation. Symmetrical light pattern maximizes distance between fixtures. Refractor: Prismatic optics designed to minimize glare and throw light down and out. Heat resistant borosilicate glass. Buy American Act Compliant: This product is a COTS item manufactured in the United States, and is compliant with the Buy American Act. Recovery Act (ARRA) Compliant: This product complies with the 52.225-21 "Required Use of American Iron, Steel, and Manufactured Goods-Buy American Act-- Construction Materials (October 2010) Trade Agreements Act Compliant: This product is a COTS item manufactured in the United States, and is compliant with the Trade Agreements Act. GSA Schedule: Suitable in accordance with FAR Subpart 25.4 Finish: Chip and fade resistant polyester powder coating. Patents: RAB sensor and fixture designs are protected under U.S. and International Intellectual Property laws . For use on LEED Buildings: IDA Dark Sky Approval means that this fixture can be used to achieve LEED Credits for Light Pollution Reduction. Dark Sky Approved: The International Dark Sky Association has approved this product as a full cutoff, fully shielded luminaire. Country of Origin: Designed by RAB in New Jersey and assembled in the USA by RAB's IBEW Local 3 workers. Tech Help Line: 888 RAB-1000 Copyright ©2013 RAB Lighting, Inc. All Rights Reserved Powered by TCPDF (www.tcpdf.org) Email: [email protected] On the web at: www.rabweb.com Note: Specifications are subject to change without notice Page 1 of 1