Created: 02/13/2013 SMS500 Wall or ceiling mount to control 500 watts incandescent or 100 watts Fluorescent lighting. Vandalproof lens. Full 180° view . Cover not included. Color: Bronze Weight: 0.5 lbs Technical Specifications UL Listing: Suitable for wet locations. Compatibility: Compatible with most electronic ballasts. Not compatible with instant start ballasts. Voltage: 120 volts AC 60 Hz. Time Adjustment: 5 seconds to 15 minutes Power Consumption: Negligible Quick Test Time: 5 second test time for fast installation. Works day or night. Time Delay: 5 seconds to 15 minutes "No Hands" Auto Testing: Auto mode starts after 4 minutes of testing. No adjustment needed. Manual Switch: None Ambient Light Sensing: Adjustable Photoelectric Control: Deactivates lights during daylight. Fully adjustable for 24 hour operation or custom applications. Manual Override: Double flip wall switch logic prevents activation by brief power outages. Resets after 8 hours. No extra wiring needed. Surge Protection: Withstands up to 3000 volts LED Detection Indicator: LED glows red day & night for "on guard" deterrence. RF Immunity: Circuits fully shielded for maximum radio frequency immunity. Adjustments: Time, ambient light & sensitivity Detection: 180° detection pattern Switching Capacity: Relay On/Off Model Switches 240 watts when lights are mounted to sensor. 500 watts Incandescent or 240 watts Fluorescent of remotely mounted lighting @ 120 volts Patents: RAB sensor and fixture designs are protected under U.S. and International Intellectual Property laws. Warranty: 5 year sensor warranty Incandescent Watts Switched: 500 watts @ 120 volts Fluorescent Watts Switched: 250 watts @ 120 volts Ratings: 5 amps Tech Help Line: 888 RAB-1000 Copyright ©2013 RAB Lighting, Inc. All Rights Reserved Powered by TCPDF (www.tcpdf.org) Email: [email protected] On the web at: www.rabweb.com Note: Specifications are subject to change without notice Page 1 of 1