Created: 02/13/2013 LS300 Luminator sensor with 110° view, manual override, 300 watt switching capacity and auto test logic. Color: Bronze Weight: 0.6 lbs Technical Specifications UL Listing: Suitable for wet locations. Voltage: 120 volts AC 60 Hz. Power Consumption: 1 watt Time Adjustment: 8 seconds to 10 minutes Photo Control: Deactivates lights during daylight Detector Sensitivity: Adjustable from 100% to 50% Wall Switch Manual Override: Two flip logic prevents activation by momentary power outages. Override resets to auto after 6 hours or at dawn. No extra wiring needed. Auto Test Logic: 5 minutes of test time when power is turned on, Rests to auto mode without further adjustment Sensor Housing: Made of tough, corrosion resistant polycarbonate Floodlights: Made of tough, corrosion-resistant polycarbonate. Accepts PAR-38 lamps, medium base, 150 watts max. Lamps not included. Surge Protection: Withstands up to 3000 volts Detection: 110° view Switching Capacity: 300 watts incandescent @ 120 volts, 2.5 amps Patents: RAB sensor and fixture designs are protected under U.S. and International Intellectual Property laws. Tech Help Line: 888 RAB-1000 Copyright ©2013 RAB Lighting, Inc. All Rights Reserved Powered by TCPDF (www.tcpdf.org) Email: [email protected] On the web at: www.rabweb.com Note: Specifications are subject to change without notice Page 1 of 1