Catalogs >
RAB Lighting >
ALED20

ALED20
2Pages

Catalog excerpts

Created: 02/12/2013 ALED20 ALED Area Light mounts to 4" square steel poles at 15-20'. 1 to 4 ALEDs can be mounted to each pole. IESNA Full Cutoff, Fully shielded optics. 5 year warranty. LED Info Watts: Color Temp: Color Accuracy: L70 Lifespan: LM79 Lumens: Efficacy: Color: Bronze Weight: 5.1 lbs Driver Info 20W 5000K (Cool) 70 100000 1,401 65 LPW Type: 120V: 208V: 240V: 277V: Input Watts: Efficiency: Constant Current 0.19 A 0.12 A 0.10 A 0.08 A 22W 93% Technical Specifications UL Listing: Suitable for wet locations. Lumen Maintenance: The LED will deliver 70% of its initial lumens at 100,000 hours of operation. IESNA LM-79 & IESNA LM-80 Testing: RAB LED luminaires have been tested by an independent laboratory in accordance with IESNA LM-79 and 80, and have received the Department of Energy "Lighting Facts" label. IP Rating: Ingress Protection rating of IP66 for dust and water Color Stability: RAB LEDs exceed industry standards for chromatic stability. IES Classification: The Type III distribution is ideal for roadway, general parking, and other area lighting applications where a larger pool of lighting is required. It is intended to be located near the side of the area, allowing the light to project outward and fill the area. Color Uniformity: RAB's range of CCT (Correlated color temperature) follows the guidelines of the American National Standard for Specifications for the Chromaticity of Solid State Lighting (SSL) Products, ANSI C78.377-2008. Warranty: RAB LED fixtures give you peace of mind because both the fixture and driver components are backed by RAB's 5 Year Warranty. For more information, Housing: Precision die cast aluminum housing, lens frame and mounting plate. Gaskets: High temperature silicone. Finish: Chip and fade resistant polyester powder coat finish. Effective Projected Area : EPA = 0.23 Green Technology: RC LEDs are Mercury, Arsenic and UV free. Cold Weather Starting: The minimum starting temperature is -40°F/-40°C Total Harmonic Distortion: THD = 8.4% Driver: Two Multi-chip 10W high output long life LED Driver Constant Current, Class 2 Ambient Temperature: Suitable for use in 50°C (122°F) ambient temperatures Fixture Efficacy: 65 Lumens per Watt Color Accuracy: 70 CRI Color Temperature (Nominal CCT): 5000K (Daylight) Tech Help Line: 888 RAB-1000 Copyright ©2013 RAB Lighting, Inc. All Rights Reserved Email: sales@rabweb.com On the web at: www.rabweb.com Note: Specifications are subject to change without notice Page 1 of 2

Open the catalog to page 1

Created: 02/12/2013 ALED20 - continued EPA: 0.10 Thermal Management: Integral cast aluminum mounting pad and external fins for optimal heat sinking to ensure cool operation with maximum LED life and light output. Two Mounting Options: Junction Box with 5 Conduit Entry Points and Threaded Plugs for surface mounting plus Cover Plate for mounting over 4" recessed junction box included Dark Sky Approved: The International Dark Sky Association has approved this product as a full cutoff, fully shielded luminaire. For use on LEED Buildings: IDA Dark Sky Approval means that this fixture can be used...

Open the catalog to page 2